🚀 go-pugleaf

Bill:

Do you have JB2 (not 2.01)?

-Rich

Bill Winspur wrote:
> 
> Greg,
> my ZoomIcon class source is attached. Thanks for your attention to the problem.
> Bill.
> 
> Greg Hamer wrote:
> 
> > The elements in an inspectors drop-down list are not instantiated until needed. No
> > point in making the designer slower than it already is.  Whether it is a bug in
> > JBuilder or something in your ZoomIcon class reamins to be seen; it is certainly a
> > JBuilder bug that you can't  determine what the problem is. The simplest
> > explanation for the behaviour  you describe would be if the ZoomIcon class was not
> > public, or its constructor was not public. Can't think of any other explanations,
> > but if you could send me the class, I would be happy to figure out what is going
> > wrong.
> >
> > Bill Winspur wrote:
> >
> > > Thanks Greg,
> > > I assigned the logging to to stderr. Unfortunately, the inspector's process of
> > > ignoring assignment of a property from a property editor's drop down did not
> > > produce any errors.
> > >
> > > However, I have since verified that my Icon works when assigned to the
> > > JButton.icon property, by creating the button using  'Jbutton(Icon)'
> > > constructor.  I just added the icon argument to the constuctor invocation
> > > generated by the IDE to do this. Interesting results from this experiment are:
> > >
> > > 1. inspector does not display the assignment of the icon to the button
> > > 2. the icon is not drawn at design time
> > > 3. the button IS drawn properly with its Icon at run time.
> > >
> > > So, I now have a work around for the problem of not being able to assign the
> > > icons in the inspector, but it is ugly. WYS is not WYG and I now dont trust the
> > > IDE to know when a property assginment is invalid. I've had this problem
> > > before, and found a similar work around. I would still like to know if the
> > > problem of not being able to assign a selection from a property editor's drop
> > > down list is:
> > >
> > > a) a bug in the IDE
> > > b) a compatibility conflict with the assigned element that the IDE finds by
> > > reflection at assignment time and simply does not publish. If so...
> > > . . . Why is it not detected before the element gets into the propEd's drop
> > > down ?
> > > . . . Is there something I can do to prevent the conflict and get WYSIWYG back
> > > for my layout ?
> > > . . . What problems could I encounter by having circumvented the IDE's
> > > (postulated) compatibility checks ?
> > >
> > > Even when wysiwyg is not an issue, i.e. when assigning properties with no
> > > visual consequences, this silent rejection of apparently valid property
> > > assignments is a pain. Under the JBuilder IDE, it  disrupts the process of
> > > developing easily wired components for distribution/sale. Properties cannot be
> > > wired up in the JBuilder IDE, but can be wired up by programmatic techniques.
> > > I'm going to check this out in Symantec Cafe next week. Maybe I'll get
> > > diagnostics if the problem is mine.
> > >
> > > I'm using JB2.
> > >
> > > Greg Hamer wrote:
> > >
> > > > If you turn on logging for JBuilder, you may see some stack traces for your
> > > > problem.
> > > > To turn on logging, edit lib\jbuilder.properties while JBuilder is not
> > > > running .
> > > > Near the top of the file, change the line
> > > > jbuilder.logOutput=nul
> > > > to point to a file.
> > > > In JBuilder3, some design time problems write messages to the message view.
> > > >
> > > > Bill Winspur wrote:
> > > >
> > > > > I'm attempting to set the icon property of a JButton in the inspector.
> > > > > I've created class ZoomIcon, which extends Object and implements Icon. A
> > > > > ZoomIcon instance draws a plus sign or a minus sign when its paintIcon
> > > > > method is invoked (intended to save a couple of gif downloads).
> > > > >
> > > > > In a test JFrame, having only the single JButton on it, I create an
> > > > > instance of ZoomIcon by:
> > > > >
> > > > > Icon plusSign = new ZoomIcon(ZoomIcon.PlusSign);
> > > > >
> > > > > In its drop down menu, the 'icon' property editor of the JButton's
> > > > > inspector shows plusSign, BUT .... when I select plus sign from the drop
> > > > > down,  the inspector flickers and fails to assign it to the property.
> > > > >
> > > > > 1. Given that the property editor accepted the ZoomIcon, which IDE
> > > > > component subsequently rejected it ?
> > > > >
> > > > > 2. Is there a diagrnostic/logging trace that would show why the property
> > > > > was rejected ?
> > > > >
> > > > > 3 What conditions can cause reject of a property assignment from the
> > > > > drop down list.?
> > > > >
> > > > > I've pored over the archives to no avail, except that a similar problem
> > > > > has been reported before <34F1CA3B.91027487@csi.com>, but there is no
> > > > > resolution of it in the archive.
> > > > >
> > > > > Thanks in advance for any help you can give.
> 
>   ------------------------------------------------------------------------
>                     Name: ZoomIcon.java
>    ZoomIcon.java    Type: Java Source (application/x-unknown-content-type-JBuilder.Java)
>                 Encoding: base64

-- 

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Rich Wilkman
Senior Quality Assurance Engineer
Borland JBuilder Team

If you see something that looks like an opinion up there,
it's mine and mine alone.

Mail sent to me from the newsgroups won't bounce but will
be ignored.  If I have time, I'll respond, but you  have
a better chance if you confine your posts to the newsgroups
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=