🚀 go-pugleaf

MILAM DESIGN SERVICES, INC. WITH OVER 23 YEARS IN THE TECHNICAL ARENA, IS  
RECRUTING FOR THE FOLLOWING POSITION(S).

IF YOU HAVE INTEREST IN ANY POSITION(S) OFFERED, PLEASE RESPOND TO:

		MILAM DESIGN SERVICES, INC.
		512-892-6161    (AUSTIN OFFICE)
            		     OR
		E-MAIL:		aus@onramp.net

AS YOU DO, PLEASE INCLUDE THE JOB CODE SHOWN IN THE ADVERTISEMENT.

                   *************************
INFORMATION YOU PROVIDE US WILL BE TREATED WITH CONFIDENCE.  

NO INFORMATION ABOUT YOU WILL BE RELEASED TO INTERESTED EMPLOYERS WITHOUT YOUR 
PRIOR CONSENT.

POSITIONS SHOWN HAVE ALL FEES PAID BY EMPLOYER.
		   *************************

JOB CODE 311D

			POSITION
BSEE - VLSI ANALOG DESIGNER TO CONVERT EXISTING 5 VOLT ANALOG DESIGN TO 3 
VOLTS.  LOW FREQUENCY 

			DESCRIPTION
Any CAD is fine, they use OPUS and prefer it, but are willing to let  someone 
train if has other skills.  MUST HAVE HSPICE.  Would like someone who has 
designed op-amps, voltage references, driver circuits.
   Must be a BSEE, with over 3 years experience typically.  They are starting  
a feasability study in next few days and would like person to participate.

LOCATION:          Austin, TX 
 

			*************************
			OTHER SIMLIAR OPENINGS
     			*************************

JOB CODE 311DK

			POSITION

BSEE - MSEE SENIOR ENGINEER VLSI CMOS DESIGN OR TEST ENGINEERING, DESIGN 
ENGINEER EXPERIENCE.  HSPICE, VERILOG, DRC TOOLS FOR VLSI

			DESCRIPTION
Skills required are:
1. 8-12 years experience in VLSI CMOS design or test 	engineering
2. 3 years experience as design engineer on custom VLSI 	design in the 
logic and circuit design phases.
3. 2 years experience supervising other engineers
4. project schedule enforcement
5. Transistors - laid out by this individual including 		editing, DRC 
and LVS verification
6. HSPICE for VLSI circuit design 7. Verilog for VLSI logic 	design
8. DRC tools like DRACULA or DIVA on VLSI project.

LOCATION:         Austin, TX
PAY RANGE:        commensurate with skills
TYPE OF POSITION: Direct, full time position


			
			*************************
			OTHER SIMLIAR OPENINGS
     			*************************

JOB CODE 311-DKJ

			POSITION
BSEE VLSI CMOS DESIGN/TESTING, HSPICE, VERILOG, DRC, LVS
TOOLS 

DESC[ Skills required are:
1.  5 years experience as VLSI CMOS design/test engineering.
2.  24 months experience on custom VLSI design in logic and 	circuit phases 
as a key contributor.
3.  1 year experience in debug and mask version phases of a 	custom VLSI  
design proejct.
4.  supervision of other engineers
5.  HSPICE circuit design, Verilog logic design on a VLSI 	project
6.  DRACULA or DIVA or other DRC tools 7.  LVS tools for 	layout 
verification

LOCATION:         Austin, TX
PAY RANGE:        commensurate with skills
TYPE OF POSITION: Direct, full time position