🚀 go-pugleaf

Ever try figuring a rake wall and everyone won�t leave you alone long enough
to get it figured? Well at a glance you can have it figured . RAKEMASTER is
a pocket size book.
it has a list of roof pitches ranging from 1/2 and 12 to 12/12  I know 12
and 12 is the easiest to figure but its in there anyway. It also will figure
pitches that run on, lets say a hip cut, or 1/2 and 17 thru to 12 and 17.You
could buy a speed square and use the book that comes with it , how ever the
book is to time consuming to get a height from, or a beam height , you have
to lay it all out on the ground. What if your studying your plans  and would
like to write the height on them . when I snap out a slab it will indicate
that the wall rakes and it will say at what height. the framer need but look
and see what his long point will be. and should know what material he needs
to start packing.  For more info please visit my web page at
http://www.angelfire.com/ca2/rakemaster



Greg wrote in message <74f6d9$a7s$3@supernews.com>...
>RAKEMASTER is a book designed to help in figuring rake wall heights. Yes
you
>could buy a speed square and use the book that comes with it, Measuring
>everything out on the ground then coming up with the correct height, Or you
>could turn to the pitch in the book and look up your span and be done with
>it. Great for figuring balloon walls and beam heights. If time allows you
>can figure stud lengths. The book works a lot like a rafter book. Each page
>is divided into two columns, one side is the foot measurement and the other
>is in inches. The book cost  $12.00 and is currently being sold by mail
>order. To get a copy please write to G & W PIKER P.O Box 1174 Lincoln ca.
>95648. Or for more info on the book please visit the site at
>www.eaglesrealm.com/rakemaster.html
>Or contact the author at Pike5@neworld.net
>
>
>