Robot controled via computer

Thread View: can.schoolnet.robotics

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by Brian J�rgensen Sat, 22 May 1999 00:00

#86

Author: Brian J�rgensen
Date: Sat, 22 May 1999 00:00

23 lines
1476 bytes

Hello there

I hope this is the right place to post this message, but I am not sure, so
if you have any suggestions where I should post then please mail me.

I am together with some friends going to create a robot, that we can control
via a computer. We have found a few sites, that have information on robot
projects. On these pages we can though not find any information on how to
control the robot via a computer, or how to build the base robot.

First we just want to build a simple robot, a car that can drive. We can
build the robot/car, but we do not know how to control it from a computer.

We will use a 386 or pentium, and a joystik or keyboard to control the
robot.

If you know a good site, where we can find information or if you can help
us, then please do so. We really need your help.

Brian J�rgensen
redaktionX@get2net.dk

remove the X

Re: Robot controled via computer

#87

Author: D A welser
Date: Fri, 28 May 1999 00:00

14 lines
1099 bytes

Brian
      yours is the only post my reader found.  I to am looking for a
robotics newsgroup to get some help with some robot arms from quetsec in
Detroit.  If I find a group I will let you know.

Dave Welser
Edgewater MD

Brian J�rgensen wrote in message ...
>Hello there
>
>I hope this is the right place to post this message, but I am not sure, so
>if you have any suggestions where I should post then please mail me.
>

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads