Article View: can.usrgroup
Article #218serial port problem - suggestions?
From: Cymru the dragon
Date: Fri, 07 Apr 1989 02:05
Date: Fri, 07 Apr 1989 02:05
21 lines
1350 bytes
1350 bytes
I am trying to configure a 386 system running Enix (SysV/386 r3.2) to eventually replace telly. A serial port problem has come up, and I'm wondering is any of you can help me trace the source. The system's mommyboard has COM1: and COM2: hardwired (though they can be disabled). The Enix manual sez that COM1: is /dev/tty00 and COM2: is /dev/tty01 (major device 3, minors 0 and 1). The COM1: port, tty00, works fine. The COM2: port, tty01, doesn't. It sends characters fine (judging from a breakout box), but received characters can't be read by the device. The problem does not appear to be hardware, as I booted Messy-DOS on the system and Kermit worked fine from BOTH ports. And since port 0 works fine, it doesn't appear that the driver is at fault. Suggestions? I'll be calling into Enix support, but the better I can explain the problem, the better. Thanks.
Technical Details
Message-ID:
<8904061255.AA28456@telly.on.ca>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!watmath!alberta!myrias!ncc!philmtl!mnetor!tmsoft!uucpShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!watmath!alberta!myrias!ncc!philmtl!mnetor!tmsoft!uucp From: evan@telly.on.ca (Cymru the dragon) Newsgroups: can.usrgroup Subject: serial port problem - suggestions? Message-ID: <8904061255.AA28456@telly.on.ca> Date: 7 Apr 89 02:05:20 GMT Sender: uucp@tmsoft.uucp (Now THATs a Daemon) Distribution: can Organization: /usr/group/cdn Lines: 21 To: moore!unix-unanimous Original-To: can-usrgroup@tmsoft.UUCP (Mailing list injector)