🚀 go-pugleaf

hallo

ich versuche erfolglos masquarading zu aktivieren.
Ich kann keine IP's und auch keine NAMEN im www anpingen.
Hier meine Einstellungen wie ich sie unter Suse6.2 (2.2.10) gemacht
habe:

=> /etc/rc.config: <=
[...]
IP_FORWARD=yes
MSQ_START="yes"
MSQ_NETWORKS="192.168.0.0/255.255.255.0"
MSQ_DEV="eth0"
MSQ_MODULES="ip_masq_cuseeme ip_masq_ftp ip_masq_irc"
[...]


=> /sbin/init.d/boot: <=
[...]
if test -e /proc/sys/net/ipv4/ip_forward -a -n "$IP_FORWARD" ; then
    ECHO_RETURN=$rc_done
    case $IP_FORWARD in
      yes)
        echo "1" > /proc/sys/net/ipv4/ip_forward ||
ECHO_RETURN=$rc_failed
      ;;
      *)
        echo "0" > /proc/sys/net/ipv4/ip_forward ||
ECHO_RETURN=$rc_failed
      ;;
    esac
    echo -e "$ECHO_RETURN"
fi
[...]


=> /sbin/init.d/masquerade <=
[...]
if [ -f /proc/net/ip_masquerade ]; then
  case "$1" in
      start)
          echo "Setting up ${VERSION} on device ${MSQ_DEV}"

          for i in ${MSQ_NETWORKS}; do  
            ${IPCHAINS} -A forward -i ${MSQ_DEV} -p all -s $i -d 0/0 -j
MASQ
          done

          for i in ${MSQ_MODULES}; do   
            ${INSMOD} $i
          done
          echo -e "$return"
          ;;

      stop)
          [... weggelassen ..]
  esac
fi
[...]


=> Der Kernel: /usr/src/linux/.config <=
[...]
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_NETLINK=y
CONFIG_RTNETLINK=y
CONFIG_NETLINK_DEV=y
CONFIG_FIREWALL=y
CONFIG_FILTER=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_RTNETLINK=y
CONFIG_NETLINK=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_TOS=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_ROUTE_LARGE_TABLES is not set
CONFIG_IP_ROUTE_NAT=y
# CONFIG_IP_PNP is not set
CONFIG_IP_FIREWALL=y
CONFIG_IP_FIREWALL_NETLINK=y
CONFIG_NETLINK_DEV=y
CONFIG_IP_ALWAYS_DEFRAG=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_TRANSPARENT_PROXY=y
CONFIG_IP_MASQUERADE=y
CONFIG_IP_MASQUERADE_ICMP=y
CONFIG_IP_MASQUERADE_MOD=y
CONFIG_IP_MASQUERADE_IPAUTOFW=m
CONFIG_IP_MASQUERADE_IPPORTFW=m
CONFIG_IP_MASQUERADE_MFW=m
# CONFIG_IP_ROUTER is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
# CONFIG_NET_IPGRE_BROADCAST is not set
# CONFIG_IP_MROUTE is not set
CONFIG_IP_ALIAS=y
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_RARP is not set
CONFIG_SKB_LARGE=y
CONFIG_IPV6=m
# CONFIG_IPV6_EUI64 is not set
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_SPX=m
CONFIG_ATALK=m
CONFIG_X25=m
CONFIG_LAPB=m
# CONFIG_BRIDGE is not set
# CONFIG_LLC is not set
CONFIG_ECONET=m
# CONFIG_ECONET_AUNUDP is not set
# CONFIG_ECONET_NATIVE is not set
CONFIG_WAN_ROUTER=m
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
# CONFIG_CPU_IS_SLOW is not set
[...]


Nach dem Aufstarten deutet nichts auf einen Fehler auch keine Meldungen
in /var/log/message.

=> ipchains -F <=
root@sonne:/ > ipchains -L
Chain input (policy ACCEPT):
Chain forward (policy ACCEPT):
target   prot opt     source          destination  ports
MASQ     all  ------  192.168.0.0/24  anywhere     n/a
Chain output (policy ACCEPT):

=> cat <=
root@sonne:/ > cat /proc/sys/net/ipv4/ip_forward
1


Meine beiden Win95 Rechner haben:
192.168.0.10/255.255.255.0 und als Gateway 192.168.0.1
192.168.0.11/255.255.255.0 und als Gateway 192.168.0.1

Telnet, Ping, Nameserver(bind8) funktioniert alles local.


Kann mir ev. jemand sagen, was ich falsch mache?
Wie kann ich den Fehler lokalisieren?

danke
Andreas
-- 
   _____ ____
  / __  / __ \   Andreas Petralia <apetrali@ee.ethz.ch>
 / /_/ / ____/  http://www.stud.ee.ethz.ch/~apetrali
/_/ /_/_/      Swiss Federal Institute of Technology Zurich   
PGP: 4A E6 07 AA 0E C2 27 19  9D 6B 0E 0A 35 7B AD 46  ICQ: 9010181