🚀 go-pugleaf

--------------0944AA1A94A12CC3F7A63AC3
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

what is the error specifically? I had some issues and resolved them, something
pointing to dma...

> It's been a long time since I messed with my awe32 but as I remember I
> got it to work by telling the RH60 that I had a SBlaster 16 or Pro. It
> took me forever to figure it out.
>
> Ben
>
> Al Kooz wrote:
> >
> > Ok, I've asked questions concerning this issue before and I've read through
> > about all the howto's and README files there is on my box about that issue
> > but I still CAN'T GET MY SB AWE32 PnP to work. I'm clueless of what it could
> > be.
> > Here's a short explanation of what happens:
> > --> I install Redhat (5.2/6.0 I've tried both), run sndconfig, gives me an
> > error with the midi device, I enter my custom isapnp.conf file. --
> > Everything works.
> > --> Then I recompile the kernel (2.2.6/2.2.10)to make it smaller, with SB
> > support and lowlevel drivers for the AWE synth, and all that. I don't change
> > any settings whatoever in isapnp.conf or conf.modules. Then, whenever I try
> > to play an mp3 file or whenever I start Quake II, it starts playing the
> > sound for a second and then my whole machine locks up.
> >
> > I've tried a thousand things. I switched back to the old kernel and it
> > worked again. What could that be ? Can anybody help me? I would be happy
> > even if I only received the default .config file for the kernel, for I could
> > see what options are enabled and which aren't!
> >
> > PLEASE HELP ME !!!
> > Al

--
/helfman

"Hello, Dave. What are you doing, Dave? I'm sure we can work this out.
Daisy, Daisy..."



--------------0944AA1A94A12CC3F7A63AC3
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit

<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
what is the error specifically? I had some issues and resolved them, something
pointing to dma...
<blockquote TYPE=CITE>It's been a long time since I messed with my awe32
but as I remember I
<br>got it to work by telling the RH60 that I had a SBlaster 16 or Pro.
It
<br>took me forever to figure it out.
<p>Ben
<p>Al Kooz wrote:
<br>>
<br>> Ok, I've asked questions concerning this issue before and I've read
through
<br>> about all the howto's and README files there is on my box about that
issue
<br>> but I still CAN'T GET MY SB AWE32 PnP to work. I'm clueless of what
it could
<br>> be.
<br>> Here's a short explanation of what happens:
<br>> --> I install Redhat (5.2/6.0 I've tried both), run sndconfig, gives
me an
<br>> error with the midi device, I enter my custom isapnp.conf file. --
<br>> Everything works.
<br>> --> Then I recompile the kernel (2.2.6/2.2.10)to make it smaller,
with SB
<br>> support and lowlevel drivers for the AWE synth, and all that. I don't
change
<br>> any settings whatoever in isapnp.conf or conf.modules. Then, whenever
I try
<br>> to play an mp3 file or whenever I start Quake II, it starts playing
the
<br>> sound for a second and then my whole machine locks up.
<br>>
<br>> I've tried a thousand things. I switched back to the old kernel and
it
<br>> worked again. What could that be ? Can anybody help me? I would be
happy
<br>> even if I only received the default .config file for the kernel,
for I could
<br>> see what options are enabled and which aren't!
<br>>
<br>> PLEASE HELP ME !!!
<br>> Al</blockquote>

<pre>--&nbsp;
/helfman

"Hello, Dave. What are you doing, Dave? I'm sure we can work this out.
Daisy, Daisy..."</pre>
&nbsp;</html>

--------------0944AA1A94A12CC3F7A63AC3--