🚀 go-pugleaf

hallo allerseits
ich(anf�nger) versuche nun schon seit geraumer zeit, das zip laufwerk (zip
100 plus) zu installieren.
ich habe den kernel wie folgt definiert:
scsi suppeort (kernel)
scsi disk support (kernel)
iomega parallel port zip  (kernel)
war alles kein problem.
das linux bootet aus meiner sicht auch ok

wer kann mir helfen
als anhang habe ich noch das boot.msg und den lilo.config angeh�ngt

besten dank f�r eure hilfe
rolf minder

boot.msg

Inspecting /boot/System.map
Loaded 4821 symbols from /boot/System.map.
Symbols match kernel version 2.0.36.
Loaded 1 symbol from 1 module.
klogd 1.3-3, log source = /proc/kmsg started.
<4>Memory: sized by int13 088h
<4>PPA: I only use between 2 to 3 parameters.
<4>Console: 16 point font, 400 scans
<4>Console: colour VGA+ 80x25, 1 virtual console (max 63)
<4>pcibios_init : BIOS32 Service Directory structure at 0x000f99d0
<4>pcibios_init : BIOS32 Service Directory entry at 0xf0530
<4>pcibios_init : PCI BIOS revision 2.10 entry at 0xf0560
<4>Probing PCI hardware.
<4>Calibrating delay loop.. ok - 400.59 BogoMIPS
<4>Memory: 63008k/65536k available (844k kernel code, 384k reserved, 1300k
data)
<6>Swansea University Computer Society NET3.035 for Linux 2.0
<6>NET3: Unix domain sockets 0.13 for Linux NET3.035.
<6>G4KLX/GW4PTS AX.25 for Linux. Version 0.35 for Linux NET3.035 (Linux 2.0)
<6>G4KLX NET/ROM for Linux. Version 0.6 for AX25.035 Linux 2.0
<4>Swansea University Computer Society TCP/IP for NET3.034
<4>IP Protocols: IGMP, ICMP, UDP, TCP
<6>Swansea University Computer Society IPX 0.34 for NET3.035
<6>IPX Portions Copyright (c) 1995 Caldera, Inc.
<6>Appletalk 0.17 for Linux NET3.035
<5>VFS: Diskquotas version dquot_5.6.0 initialized
<4>Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
<4>Checking 'hlt' instruction... Ok.
<4>Linux version 2.0.36 (root@rolf_minder) (gcc driver version egcs-2.91.60
19981201 (egcs-1.1.1 release) executing gcc version 2.7.2.3) #10 Sat Feb 20
14:43:21 MET 1999
<4>Starting kswapd v 1.4.2.2
<6>Serial driver version 4.13p with no serial options enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<6>ttyS02 at 0x03e8 (irq = 4) is a 16550A
<6>ttyS03 at 0x02e8 (irq = 3) is a 16550A
<6>lp0 at 0x0378, (polling)
<6>PS/2 auxiliary pointing device detected -- driver installed.
<4>Real Time Clock Driver v1.09
<4>ide: i82371 PIIX (Triton) on PCI bus 0 function 9
<4>    ide0: BM-DMA at 0xe000-0xe007
<4>    ide1: BM-DMA at 0xe008-0xe00f
<4>hda: QUANTUM FIREBALL ST3.2A, 3079MB w/81kB Cache, CHS=782/128/63, UDMA
<4>hdb: IBM-DTTA-350840, 8063MB w/467kB Cache, CHS=1027/255/63, UDMA
<4>hdc: HP CD-Writer+ 7200, ATAPI CDROM drive
<4>hdd: TOSHIBA CD-ROM XM-6102B, ATAPI CDROM drive
<4>ide2: ports already in use, skipping probe
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<4>md driver 0.36.3 MAX_MD_DEV=4, MAX_REAL=8
<4>linear personality registered
<4>raid0 personality registered
<4>ppa: Version 1.42
<4>scsi0 : SCSI host adapter emulation for IDE ATAPI devices
<4>scsi : 1 host.
<4>scsi : detected total.
<4>Partition check:
<4> hda: hda1 hda2 < hda5 hda6 >
<4> hdb: hdb1 < hdb5 hdb6 hdb7 hdb8 hdb9 hdb10 >
<4>VFS: Mounted root (ext2 filesystem) readonly.
<4>Adding Swap: 130748k swap-space (priority -1)
Kernel logging (proc) stopped.
Kernel log daemon terminating.

loli.config
# LILO Konfigurations-Datei
# Start LILO global Section
append="Linux"
boot=/dev/hdb7
#compact       # faster, but won't work on all systems.
read-only
prompt
timeout=100
vga = normal    # force sane state

# End LILO global section
# Linux bootable partition config begins
image = /boot/vmlinuz
root = /dev/hdb7
label = Linux
append = "lp=0x378 ppa=0x3BC"
# Linux bootable partition config ends
#
# Second Linux bootable partition config
image = /boot/vmlinuz.old
  root =  /dev/hdb7
  label = Linux.old
# 2nd Linux bootalbe partition config ends
# DOS bootable partition config begins
other = /dev/hda1
label = DOS_WINDOWS
table = /dev/hda
# DOS bootable partition config ends
#


--
rolf minder, ittigen
r.minder@ipsc.ch