Probleme mit Ghostview Prints

Thread View: ch.comp.os.linux

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Wilfried Noell Fri, 21 May 1999 00:00

#22326

Author: Wilfried Noell
Date: Fri, 21 May 1999 00:00

34 lines
1618 bytes

Hello,

When printing a long document of about 70 pages out from Ghostview
(printer setting is lpr), the output of gs is also printed and mixed
with the actual print, although the gs option setting in gv is set to
quiet. On the top end of every tenth page or so something like

%% [Page: 23] %%
                    %% [Page: 24] %%
                                        %% [Page: 25] %%

is printed.

It seems to be a pipe problem from gv ??? GV should print the output
from GS to lpr rather than the stdout. How can this be done in gv ????

Any help is highly appreciated!

Backgroundinfo: OS: RedHat Linux 5.2 (Linux Kernel 2.0.36...). It was
shipped with gv3.5.8 and Ghostscript 4.03. I upgraded Ghostcript
with the gs....rpm files to gs5.50. The printer is an HP 5L.

Regards
Wilfried Noell

=========================================================

Wilfried Noell            Phone: +41 32 7205 548
Institute of              Fax:   +41 32 7205 711
Microtechnology
University of Neuchatel   Internet:  http://www-imt-dr.unine.ch
Rue Jaquet-Droz 1         mailto:    Wilfried.Noell@imt.unine.ch
2007 Neuchatel
Switzerland

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads