64 Bit addressing on R4000?

Article View: comp.arch

Article #12241

#12241

From: Reinhard Kirchner
Date: Mon, 24 Jun 1991 13:26

20 lines
1318 bytes

Months ago when the first discussions about the new MIPS R4000 processor
where held here people from MIPS stated ( if I remember well ) that
they will cross the limit of 32 bit addresses and be able to address a
64 bit virtual address space.

Now today I got a data sheet of the R4000 from IDT, and it does not only
say anything about this, it also shows a block diagram with a 32 * 32 bit
register set. So: will the R4000 really have 64 bit addresses and how
can they be generated with 32 bit registers ?

What comes into mind is just pairing them, to get 64 bit, but this would
require extra instrucions, or a mode bit, and would in any case reduce
the amount of usable registers considerably.

Maybe people from MIPS ( Mr. Mashey ? ) could shed some light on this ?

Reinhard Kirchner
Univ. Kasierslautern, Germany
kirchner@uklirb.informatik.uni-kl.de

Technical Details

Message-ID: <8083@uklirb.informatik.uni-kl.de>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!think.com!snorkelwacker.mit.edu!ira.uka.de!sun.rhrk.uni-kl.de!uklirb!kirchner

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!think.com!snorkelwacker.mit.edu!ira.uka.de!sun.rhrk.uni-kl.de!uklirb!kirchner
From: kirchner@informatik.uni-kl.de (Reinhard Kirchner)
Newsgroups: comp.arch
Subject: 64 Bit addressing on R4000?
Keywords: R4000, 64bit addressing
Message-ID: <8083@uklirb.informatik.uni-kl.de>
Date: 24 Jun 91 13:26:00 GMT
Sender: news@uklirb.informatik.uni-kl.de
Lines: 21