🚀 go-pugleaf

In article <4139@ganymede.inmos.co.uk> davidb@inmos.co.uk (David Boreham) writes:
>No. Parity is intended to find soft errors. The majority of failures
>may well be memory problems but I'd bet that they were nothing to do 
>with soft errors. 
>
>You can very easily check on the state of your memory chips using a
>power-on test. A decent power-on-selftest can also look for marginal
>failures.
>
>Still no parity needed.

This works well for some cases but not others. Some applications require
7x24 uptime. These folks are happy to pay for single bit error correction and
double bit error detection, and get real upset if they have to power their
machines down for any reason. One system with which I was personally associated
was booted for any reason only three times in 19 months and the processor was
never powered down during that time.

Terry

Disclaimer: I'm not a hardware type and I don't know what Amdahl's views on
this subject might be (although I bet I could guess 8-).