🚀 go-pugleaf

   > ... on the Berkeley RISC I and II chips, between 6 and 10 percent
   > of the chip area was used for decoding and control logic.  Compare
   > this with a figure of 50-60% on a 68000 or Z8000 ...
   >
   > I think it would be quite easy to get more than a 1k cache out
   > of 40-54% of the chip size.  After all, if each 1k of cache size
   > takes even 40% of the chip's area, how would you get a 32k (or,
   > for that matter, 31k) cache on a chip in the first place?


What percent of the die area of a microprocessor should be devoted to
*transistors*?  It's under 100%, because some area is consumed by
non-transistor essential things like interconnect wires, bonding pads,
power busses, etc.

How much?   Less than 1 pecent?  More than 80%?

=============================================================================
"Any clod can have the facts.  Having an opinion is an art."    -HL Mencken
"Get your facts first, then you can distort them as you please." -M Twain
"The truth is more important than the facts."           -Frank Lloyd Wright
-- 
 -- Mark Johnson	
 	MIPS Computer Systems, 930 E. Arques, Sunnyvale, CA 94086
	(408) 991-0208    mark@mips.com  {or ...!decwrl!mips!mark}