🚀 go-pugleaf

Archive-name: auto/comp.unix.sys5.r4/svr4mon-0-2-alpha-release-announcement


I've finished the 0.2 alpha version of a (partially) new program named
svr4mon. I've actually taken the u386mon code as a strating base.
Altough the look and feel is much the same as in u386mon, the internal
structure changed drastically. This means that svr4mon ONLY runs on SVR4
unix as the name itself indicates :-))

Below I've included the README file for more information. Please no flames
on my bad english. Corrections are welcome and I want to give getting better.

I've located the 0.2 version on the below ftp-server. I need some people
who will test the code on portability and functioning.

    Server:    ftp.ims.uni-stuttgart.de (141.58.127.8)
    Directory: pub/unix/svr4
    File:      svr4mon-0.2.tar.Z (81309 bytes)
	       svr4mon-0.2.README (2831 bytes) this is actually the same file
					       included below and it is
					       included in the tar archive

If there are enough people wanting me do post it I will then do so. But tell
me where (alt.sources,comp.unix.sys5.r4???).

As always, comments are welcome.

-------- CUT HERE --- CUT HERE ---------------------------------------------



				 S V R 4 M O N


		       A SVR4 system performance monitor

				 Version: 0.2

			   Last update: 13-OCT-1992


------------------------------------------------------------------------------
NOTE:

This is the first release of svr4mon. So it is definitely in an (pre-) alpha
state. It runs fine and without any crashes on my system and I think it
shouldn't give any problems to other SVR4's as well.
The documentation of the whole package is terrible and not yet finished.

Please report bugs, fixes or comments to av@ssw.de

And please don't forget, it's an alpha release.

------------------------------------------------------------------------------

This file contains a few comments about svr4mon.

"svr4mon" is a system monitor for SVR4 unix. It will give continual reports
about the state of the system. It requires read access to the memory files
"/dev/kmem" and "/dev/mem" as well as the system image "/stand/unix".

svr4mon requires terminfo style curses and will use color if you have
it.  It works best with a 43 line (or greater) screen, but will work
with a 24 line screen with some limitations.

Features:

    * display of overall system CPU and wait times
    * display of sysinfo/minfo structures
    * display of memory usage
    * display of avenrun values and system age
    * display of var structure
    * display of bootinfo structure
    * display of tune structure
    * display of total process summary
    * display of top X (somehow sorted) processes like ps(1)
    * display of STREAMS utilisation
    * display of architecture and hardware information
    * display of FAS or SAS serial driver status variables (not yet well tested)
    * one window of other unrelated kernel variables (misc)
    * on-line interval changing (1 sec. steps)
    * termlib color support
    * efficient access to kernel structures using mmap(), therefor almost no
      system calls and less CPU usage


Sample output (with 43-line screen)
===================================

svr4mon-0.1 S: SINIX-D R: 5.41 V: A0007 N: omega                        22:53:15
---- CPU --- tot usr ker brk ---------------------------------------------------
 2 Sec Avg % 100  92   7   0 uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuukkk*
10 Sec Avg %  78  68  10   0 uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuukkkkk
20 Sec Avg %  89  76  13   0 uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuukkkkkk
---- Wait -- tot  io pio swp -- (% of real time) -------------------------------
 2 Sec Avg %   0   0   0   0
10 Sec Avg %  20  20   0   0 iiiiiiiiii
20 Sec Avg %  10  10   0   0 iiiii
---- Sysinfo/Minfo --- (last  2000 msec activity) ------------------------------
bread          0  readch      10022  pswitch    30  vfault      0  unmodsw     0
bwrite         0  writch      73814  syscall    82  demand      0  unmodfl     0
lread         60  rawch           1  sysread    25  pfault      0  psoutok     0
lwrite        18  canch           0  syswrit    21  cw          0  psinfai     0
phread         0  outch         526  sysfork     0  steal       0  psinok      0
phwrite        0  msg             0  sysexec     0  frdpgs      0  rsout       0
swapin         0  sema            0                 vfpg        0  rsin        0
swapout        0  maxmem     32384k  runque      2  sfpg        0
bswapin        0  freemem     4368k  runocc      2  vspg        0  pages on
bswapout       0  mem used      87%  swpque      0  sspg        0  swap        0
iget           0  maxswap    65536k  swpocc      0  pnpfault    0  cache       0
namei          0  freeswap   49516k  Age of system  wrtfault    0  file        0
dirblk         0  swap used     25%     2d  3h 14m  avenrun 0.72  0.25  0.08



------ Var ------   ------ Bootinfo ------   ------ Tune -----   ----- Proc ----
v_autoup       60   bflags   00000000        t_ageintvl      0   sleep        60
v_buf         200                            t_fsflushr      1   run           1
v_hbuf        256   memory available         t_gpgshi        0   zombie        1
v_hmask       255   00000000 0000b000        t_gpgslo       42   stop          0
v_maxpmem       0   0000b000 00095000        t_minarmem     25   idle          0
v_maxup        60   00100000 01f00000        t_minasmem     25   onproc        1
v_pbuf         20                            t_dmalimit   4096   xbrk          0
v_proc        600   memory used              t_flckrec    1000   ---------------
v_call        250   00000000 00003000        t_minakmem     16   total        63
v_nglobpris   160   0000b000 00095000 KTXT                       in mem       63
v_maxsyspri    99   00100000 00099000 KTXT
v_sptmap      250   00199000 00030000 KDTA
v_bufhwm     2000

ESC=quit P,p=ps m=main h=hack s=stream x=serial a=arch l/u=lock +/-=rate

The main display
================

A brief description of reported information:

0.  The '+' and '-' command adds or subtracts one second from the
    update interval.  The value at startup is 2 seconds, the
    range 1 to 4.  Below, the terms "x1", "x5" and "x10" mean
    "interval X 1", "interval times 5" and "interval times 10,"
    respectively.

    You can determine the update interval by looking at the top
    CPU histogram, labeled "Instant" for 1, "X sec" for 2-4 second
    intervals.

    On some *fast* systems, values may be too large in 3 and 4
    second intervals and corrupt the display.  But the, you have
    the extra CPU to run it more often :-).

1.  The CPU utilization is shown with smoothing of x1 ("instant" if
    the update interval is 1 second), x5 and x10 seconds.  Total
    CPU usage is shown, with user, kernel and "break" subdivided.
    Most performance utilities (vmstat) lump kernel (CPU_KERNEL)
    and wait (CPU_WAIT) times together as kernel time.  u386mon
    considers CPU_WAIT time as idle (the CPU could have been
    doing something if an otherwise ready process wasn't waited).

    On a color display, total cpu utilization is displayed in
    green if the cpu utilization is below 70%, yellow if utilization
    is between 70% and 89% and red if 90% or above.

2.  The Wait display shows the x1, x5 and x10 second smoothed
    percentages of real time no process could be run because
    otherwise ready to run processes were waiting on logical,
    swap or physical I/O.

    On a color display, total wait time is displayed in green if
    it is below 30%, yellow if utilization is between 30% and 49%
    and red if 50% or above.

3.  Sysinfo/Minfo display shows, generally, the number of events
    for a measured value since the last display update.  For
    example, runque shows the number of times a process was
    placed on the run queue.  An exception is the memory and swap
    space fields: These numbers reflect absolute current
    utilization over the period shown in the "last XXXXX msec"
    value in the banner.  Periods of 4000 milliseconds are shown
    in red, 1500 to 3990 milliseconds in blue and less than 1500
    milliseconds in the normal banner color.

    My guess as to the meaning of the sysinfo and minfo values is
    in the file EXPLAIN.  I am not familiar with the meanings of
    all the items, having looked through the header files, sar
    man pages and the other UNIX hacker-ganda I could find.
    Comments are appreciated.

4.  If you run u386mon on a 43 line display, extra information is displayed
    on the bottom of the screen (from the struct var v, bootinfo
    and proc kernel databases).

    On a 24/25-line screen, the 'e' command accesses the Var/Bootinfo/
    Tune/Proc display, overlaying the Sysinfo/Minfo display.
    Using 'm' returns you to the main display.

    Bootinfo will be missing from version running on platforms which
    do not support it.

5.  On a color display, static numeric values, such as maxmem appear
    in blue (the same color as screen literals/labels).  Dynamic
    numeric values are displayed in green, with the exception of
    total cpu and wait percentages, which appear in light green,
    red or yellow.

6.  An "INEXACT" indication on the top line means that u386mon was
    not scheduled quickly enough to capture accurate 1 second (nominal)
    values.  Continued INEXACT indication suggests the x5 and x10
    second smoothed values are also wrong.

    An "INVALID" indication means u386mon was scheduled 3 or more
    seconds late; all percentage isplays are now suspect.

7.  IN GENERAL, if you see any red characters on the display,
    immediately take grain of salt. If you have no color screen
    and still see red, add tequila to salt.

8.  If you are running as root, you may use the -l switch or the
    'l' command to lock u386mon into memory.  If you do this, PLOCK
    will appear at the top of the screen to remind you of this hoggy
    behavior.  The u386mon process will not be listed in a process
    status display since SSYS (locked, resident) processes are not
    shown.

Process Status Display
======================

1.  Pressing 'p' causes a process status display of sorts to be
    shown, overlaying Sysinfo/Minfo on a 25 line screen or
    Var/Bootinfo/Tune/Proc on a 43 line screen.  On a 43 line screen, 'P'
    causes a larger ps display to be shown, overlaying Sysinfo/Minfo and
    Var/Bootinfo/Tune/Proc.

    Sample output:

S     USER   PID  CPU PRI NI  UCPU   SCPU  SIZE TTY COMMAND
R       av  10700  80   2   0  0:06   0:00  440  23 /usr/ccs/bin/as -Qy -o main.
p     root  10701  11  34   0  0:01   0:00  400  15 ./svr4mon -p
s     root    258   2  48   0 13:43   5:27 1204  ?? /usr/bin/X11/X -switch -pn -
s     root    633   1  48   0  0:03   0:05  456  ?? /usr/bin/X11/xterm -geometry
s     root    631   0  48   0  2:02   3:55  456  ?? /usr/bin/X11/xterm -geometry
s     root    627   0  48   0  1:11   0:17  456  ?? /usr/bin/X11/xterm -geometry
s     root    634   0  48   0  0:20   0:28  456  ?? /usr/bin/X11/xterm -geometry
s     root    632   0  48   0  0:15   0:24  456  ?? /usr/bin/X11/xterm -geometry
s     root    630   0  48   0  0:14   0:22  456  ?? /usr/bin/X11/xterm -geometry
s       av    657   0  48   0  0:14   0:23  436  ?? mwm
s     root    734   0  35   0  0:13   0:17  564  14 tcsh
s     root  10473   0  48   0  0:09   0:07  456  ?? xterm -geometry 80x24+1+353
s     root  10439   0  46   0  0:07   0:11 1068  14 /usr/bin/m -def=/usr/lib/MAX
s       av    636   0  48   0  0:06   0:23  312  ?? /usr/bin/X11/xload -geometry
s     root    751   0  46   0  0:04   0:02  564  18 tcsh
s     root   2376   0  46   0  0:03   0:03  564  13 tcsh
s       av    671   0  35   0  0:03   0:03  564  /3 tcsh
s     root    146   0  48   0  0:03   0:12  284  ?? /usr/sbin/cron
s     root   2044   0  35   0  0:02   0:02  564  15 tcsh
s       av    667   0  35   0  0:02   0:02  564  16 tcsh
s     root    438   0  46   0  0:02   0:01  564  02 -tcsh
s       av    665   0  35   0  0:02   0:01  564  13 tcsh
s     root   5494   0  46   0  0:02   0:01  564  /3 tcsh
s       av    669   0  35   0  0:02   0:00  564  18 -tcsh
PROCS OMITTED: 39

    NOTES
    a.   S - two character status
            1st character - process status
               s - sleeping
               R - ready to run (might be running if u386mon were not)
               z - zombie
               d - stopped by debugger
               i - idle (in creation?)
               p - running on processor (on single CPU systems, only u386mon
                   will show this)
               x - XBREAK - process growing or shrinking
            2nd character - process swap status
               S - process is swapped
               blank - process is in memory

    b.  If the process is running with setuid, a '#' appears to
        the right of the username.

    c.  On color systems, processes ready to run are shown in yellow
        unless they are ready, but swapped out, in which case they
        are shown in red.

3.  Since a limited space is available for displaying process
    status, particularly on a 25-line screen, a selective elimination
    algorithm is used to whittle the list when insufficient room
    is available.  init (pid 1) and system/resident (SSYS)
    processes are never displayed.  When a display cycle is to begin
    and there is not room for all of the processes to be shown,
    processes are sorted in the following order:

    a. 'getty', 'uugetty', 'sh', 'csh', and 'ksh'
    b. swapped and zombie processes
    c. no cpu processes (no cpu time during last cycle)
    d. sleeping processes

    If there is still insufficient room, an indication to the effect
    is displayed (tough cookies).

STREAMS display
===============

    This display shows STREAMS queues and buffers utilization of the system.

    Sample output:

--------------------------------------------------------------------------------
RESOURCE               ALLOC   IN USE    FREE         TOTAL     MAX    FAIL
Streams                  144      144       0          6700     152       0
Queues                   716      716       0         14528     720       0
Message blocks           508      122     630       1784031    2014       0
Data blocks              507      122     385       1784025    2013       0
Link blocks               15       15       0            15      15       0
Stream events              2        2       0             2       2       0

strmsgsz:        0k
strctlsz:     4096k
nstrpush:        9
strthresh:       0k

SERIAL display
==============

    Currently only FAS and SAS statistics are supported. I'm using my own
    port of FAS to SVR4 and I don't know if it works with the original FAS
    driver (which is designed for SVR3 but may run on SVR4). I've added
    support for SAS but I haven't tested it yet.
    See config.h in order to enable one or none of them.

    Sample output:

---- FAS statistics ------------------------------------------------------------
Port:  0 Type:  NS16450 Units:    1 Vec:    4 Sioa:  3f8 SioaOff:    8 Mcb:    8
iflag: IGNBRK BRKINT IGNPAR PARMRK INPCK ISTRIP INLCR IGNCR ICRNL IUCLC
       IXON   IXOFF  IXANY
cflag:   9600-8-O-1 CLOCAL CREAD HUPCL
device_flag: OPN LCK ENBL XBSY XBRK XLCK HANG DTIM GTIM CARR WANT
o_state:     DLOUT GTTY WOPN NDIAL CCOO FCO UNEN CL HWHS
flow_flag:   HWOHS HWIHS HWOSTP HWISTP SWOSTP SWISTP SWFCREQ RXFER IBLK
mod_stat: CTS_DLT DSR_DLT RING_TDG DCD_DLT CTS_PRS DSR_PRS RING_PRS DCD_PRS
cstart: 0x11 cstop: 0x13 hupwait: 0

Port:  1 Type: NS16550A Units:    1 Vec:    3 Sioa:  2f8 SioaOff:    8 Mcb:    8
iflag: IGNBRK BRKINT IGNPAR PARMRK INPCK ISTRIP INLCR IGNCR ICRNL IUCLC
       IXON   IXOFF  IXANY
cflag:   9600-8-N-1 CLOCAL CREAD HUPCL
device_flag: OPN LCK ENBL XBSY XBRK XLCK HANG DTIM GTIM CARR WANT
o_state:     DLOUT GTTY WOPN NDIAL CCOO FCO UNEN CL HWHS
flow_flag:   HWOHS HWIHS HWOSTP HWISTP SWOSTP SWISTP SWFCREQ RXFER IBLK
mod_stat: CTS_DLT DSR_DLT RING_TDG DCD_DLT CTS_PRS DSR_PRS RING_PRS DCD_PRS
cstart: 0x11 cstop: 0x13 hupwait: 10

1) Pressing 'x' causes the above display to be shown. If you're using a
   24 lines display, you'll see only 1 port at a time. Pressing any key
   in the range '0' - '9' will show the port with that given number.


HACKERS (or MISC) display
=========================

    The display shows variables which might be interesting. I couldn't
    find a reasonable topic for any of them so they are here.

    Sample output:

--------- Hackers Variables ----------------------------------------------------
lotsfree     324k minhidustk     16384 dma_check_on        1 Dstflag           1
desfree      168k minustkgap   8388608 dma_freemem       951 maxminor     262143
minfree      100k piosegsz        1024 dma_io_slots       10 putbufsz       4000
nscan          0k syssegsz        2048 dma_limit_pfn    4095 sanity_clk        0
desscan      100k segmapsz        2024 dma_single          1
maxpgio        40 piomapsz          50 dmaable_free       40 ncsize          700
deficit         0 piomaxsz          64 dmaable_pages      40 filecnt         223
freemem     6180k pages_pp_max     200 dmaable_sleep       0 maxclick       8192
pfreecnt       20 minpagefree       25                       pfreecnt         20
nptfree         0 nptalloced         0                       ngroups_max      16
availrmem  24508k npgoutbuf         32                       rstchown          0
availkmem  18060k nnotpgoutbuf      32                       Hz              100
availsmem  73592k exec_ncargs    51200                       Timezone        480


HARDWARE & ARCHITECTURE display
===============================

    The display shows the hardware configuration and installed hard
    drives of the system.

    Sample output:

--------- Hardware configuration -----------------------------------------------
ID    DISK       TYPE  #CYL SEC/TRK #PART #HEADS BYT/SEC  ALTS   CAPACITY
0     0s0     SCSI_HD  1030      32    11     64     512  2048    1030 MB
??    c8d1s0  SCSI_HD   573      32    ??     64     512    ??     573 MB



Floppy 0:  1.44MB   3.5"     Floppy 1:   1.2MB  5.25"

Main Processor:      i386
Math Processor:    i80387   do386b1: 0 do386b1_387: 0 do386b1_x87: 0 do387cr3: 0

Base Memory:    640k  Extended Memory:  31744k  Expanded Memory:  31744k


How to get going
================

1) Take a look to the Makefile. Check the varibales for comilation
   and installation.

2) Take a look to config.h and define or undefine the symbols you need.

3) make depend

4) make

5) ./svr4mon

6) make install (as root)

7) Enjoy :-))


Programming Concepts
====================

The major advantage of this program is it's use of mmap() instead of read()
and lseek() as in "traditional" comparable programs. Using mmap() no further
system calls are neccessary to access kernel variables.

In order to access a kernel variable the address of the kernel variable
is translated to an address in user process space. The base address in user
process space is determined at startup by calling mmap() without giving
any hints where the map should be placed. The result of this call to mmap()
is taken as our base address. The kernel address space ranges from
0xC0000000 to 0xE0000000. Typically the first call to mmap(), which gives
us the base address for our user space mapped pages, is somewhat higher
than 0x80000000 (the start address for shared libraries).

Starting at the base address all pages which are mapped during execution
must be arranged in ascending order and must be contigious.

If we now want to access a kernel variable, we take the address and translate
it to a address relative to our base in user space. If we then try to access
data through that pointer two conditions can raise:

1) The page holding that address is not yet mapped. As a result a signal
   SIGSEGV will be produced and a signal handler, which was previously
   installed, is called. This signal handler determines the page which holds
   this address and maps the page via mmap(). The signal handler then
   returns and the instruction which caused the fault will be restarted.

2) The page holding that address is currently mapped, no problems arises.

So we have a demand paging system which only loads neccessary pages.
At startup time no pages are mapped and after the first cycle most
pages are mapped then.

Using this method, access to kernel variables is just the same as the
access to "ordinary" variables in user space. The mapping of the
required pages is (almost) transparent to the programmer. I think it's
really faster than using the lseek()/read() method.

I hope you got the idea and I'm very interested in getting comments on
this method.


COPYRIGHT
=========

    Copyright (C) 1992  Andreas Vogel

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.


Acknowledgments
===============

This code is based on u386mon written by wht@n4hgf.Mt-Park.GA.US (Warren
Tucker) for SVR3 unix. Thanks to the author for this excellent program.
But if you have problems with svr4mon please don't contact him because he
wasn't involved in the developement of svr4mon.


Contibutors
===========

Thanks to:

    bl@ssw.de (Benno Lange)
    sv@ssw.de (Stefan Vogel)
    Bo.Muldbak@ColumbiaSC.NCR.COM (Bo Asbjorn Muldbak)
    andreas@xenox.w.open.de (Andreas Laumann)


If your name appears on the above list and I've forgotten a
particular contribution you made, or if it doesn't appear at all,
please forgive me.


HOW TO GET svr4mon
==================

I will try to put the latest version of svr4mon on the following FTP server:

Server:    ftp.ims.uni-stuttgart.de (141.58.127.8)
Directory: pub/unix/svr4
File:      svr4mon-<v>.<r>.tar.Z
	   (where <v> stands for the current version and <r> for the release)

I also will post new releases to alt.sources or if applicable patches for
updating from old versions.

Please don't ask me to send out versions via mail.

Hope that's all,

------------------------------------------------------------------------------
Andreas Vogel                   Bahnhofstr. 13 / D-7300 Esslingen / Germany
				Voice:  +49-711/357613
				E-Mail: av@ssw.de

-------- CUT HERE --- CUT HERE ---------------------------------------------


So long,


-- 
Andreas Vogel                   Bahnhofstr. 13 / D-7300 Esslingen / Germany
				Voice:  +49-711/357613
				E-Mail: av@ssw.de