[gnu.g++.help] Re: How do I compile g++ on a 286 and UNIX?

Article View: comp.archives

Article #2557

#2557

From: Steve Bleazard
Date: Mon, 10 Dec 1990 02:28

27 lines
1766 bytes

Archive-name: gnu/gcc/xenix/1990-12-09
Archive-directory: unix.secs.oakland.edu:/pub/xenix/gcc/ [141.210.180.2]
Original-posting-by: steve@robobar.co.uk (Steve Bleazard)
Original-subject: Re: How do I compile g++ on a 286 and UNIX?
Reposted-by: emv@ox.com (Edward Vielmetti)

tiemann@cygnus.com writes:
> 
> You gave up on the wrong task.  You should give up on the 286.  G++
> runs under dozens of standard UNIXs.  It doesn't run under XENIX as
> far as I know.

g++ works fine on Xenix 386, as does gas, gcc and gdb.  I am not aware
of versions that will run on Xenix 286.  I believe there is an MSDOS
version of GCC but I haven't seen it.

A binary distribution of gas, gcc, gdb, g++ and libg++ can be found
at the following ftp site:

        unix.secs.oakland.edu   (35.146.180.2) /pub/xenix/gcc

Steve
-- 
Steve.Bleazard@RoboBar.Co.Uk        | Phone:  +44 81 991 1142 x153
Snr Software Engineer, Robobar Ltd. | Fax:    +44 81 998 8343 (G3)
22 Wadsworth Road, Perivale.        |
Middx., UB6 7JD ENGLAND.            | ...!ukc!robobar!steve

Technical Details

Message-ID: <1990Dec10.022829.18781@ox.com>

Path: arc1-ca.pugleaf.net!utzoo!censor!geac!torsqnt!news-server.csri.toronto.edu!cs.utexas.edu!yale!ox.com!emv

References: <15729.275a6ee1@levels.sait.edu.au> <9012041322.AA13699@teacake.Eng.Sun.COM> <1990Dec9.075145.5586@robobar.co.uk>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!censor!geac!torsqnt!news-server.csri.toronto.edu!cs.utexas.edu!yale!ox.com!emv
From: steve@robobar.co.uk (Steve Bleazard)
Newsgroups: comp.archives
Subject: [gnu.g++.help] Re: How do I compile g++ on a 286 and UNIX?
Message-ID: <1990Dec10.022829.18781@ox.com>
Date: 10 Dec 90 02:28:29 GMT
References: <15729.275a6ee1@levels.sait.edu.au> <9012041322.AA13699@teacake.Eng.Sun.COM> <1990Dec9.075145.5586@robobar.co.uk>
Sender: emv@ox.com (Edward Vielmetti)
Reply-To: steve@robobar.co.uk (Steve Bleazard)
Followup-To: gnu.g++.help
Organization: Robobar Ltd., Perivale, Middx., ENGLAND.
Lines: 27
Approved: emv@ox.com (Edward Vielmetti)
X-Original-Newsgroups: gnu.g++.help

Reply to Parent Message