Adventures in X00 FOSSIL-land

Thread View: comp.bbs.misc

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Michael Chui Mon, 27 Jul 1992 04:12

#189

Author: Michael Chui
Date: Mon, 27 Jul 1992 04:12

31 lines
1337 bytes

Problem 1:
	I'm attempting to run the X00 1.24 FOSSIL driver with the Boyan 5.0
comm program on an internal Infotel 9600 configured as COM4, IRQ 2.
Everything looks fine, until I try to communicate with the modem.  All
chars in Boyan aren't echoed back, e.g. I type "AT".  The screen shows nuttin,
honey.
	The CONFIG.SYS command line I'm using is:

DEVICE=C:\X00\X00.SYS E 2=COM4,IRQ2

BTW, Boyan works fine w/o X00, but I'd like to use the FOSSIL for a BBS.


Problem 2:
	I try to put multiple parameters on the CONFIG.SYS command line
without considerable success.  For example,

DEVICE=C:\X00\X00.SYS 3 E 2=COM4,IRQ2

shows 3 ports using XU, but the setting of port 2 to COM4,IRQ2 isn't done.
But,

DEVICE=C:\X00\X00.SYS E 2=COM4,IRQ2 3

sets port 2 correctly, but only allows 1 (the default number) of ports.
The docs claim, "The parameters are given...in any order."  (p. 6)

Any ideas?  Thanks.

Michael Chui
mchui@cs.indiana.edu

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads