Re: MODEM barf or How to get connected speed with locked port

Article View: comp.bbs.waffle

Article #3107

#3107

From: Mike Shirley
Date: Fri, 22 Jan 1993 06:42

20 lines
1311 bytes

fenner@postscript.cs.psu.edu (Bill Fenner) writes:

> In article <wmNPXB14w165w@slic.cts.com> mikey@slic.cts.com (Mike Shirley) wri
> |I use a Telebit T3000 and I know it reports the locked speed and
> |the connection speed.  Is there any way to get waffle to take
> |advantage of the info reported by the modem?
> 
> The ZyXEL 1496 can report only the connection speed if you tell it ATX5;
> perhaps the T3000 has a similar option?  (with ATX5, I get result codes like
> CONNECT 16800/ARQ or CONNECT 14400 or ...)

I get these also.  The T3000 has a similar X12 which shows the
DTE connect string.  I will adjust the X setting to see if the
modulation speed will get picked-up by Waffle.  I think that the
locked port parm is the problem though, not the speed being
reported by the modem.

--
  Mike, San Diego, CA USA     Public Key Available
  mikey@slic.cts.com    GEnie: SLIC    Ham: WB6WUI

Technical Details

Message-ID: <T6mRXB1w165w@slic.cts.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!elroy.jpl.nasa.gov!sdd.hp.com!crash!slic!mikey

References: <C17MI8.Eq5@cs.psu.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!elroy.jpl.nasa.gov!sdd.hp.com!crash!slic!mikey
From: mikey@slic.cts.com (Mike Shirley)
Newsgroups: comp.bbs.waffle
Subject: Re: MODEM barf or How to get connected speed with locked port
Message-ID: <T6mRXB1w165w@slic.cts.com>
Date: Thu, 21 Jan 93 22:42:40 PST
References: <C17MI8.Eq5@cs.psu.edu>
Organization: Muth Valley Bell  (619/390-SLIC BBS; V32bis)
Lines: 20

Reply to Parent Message