🚀 go-pugleaf

tcscs!zeta@src.honeywell.com (Gregory Youngblood) writes:

> Disable MNP5 and V.42bis before calling a UUCICO session (this can be done
> easily in the DIALERS section).  When I did that I consistantly get throughpu
> of 850 to 900 cps receive and 550 to 650 cps when sending.  This is with 'g'
> protocol and the standard packet sizes and windows sizes.

  I only disable MNP-5 for outbound calls of any sort, including UUCP, and
I *still* get 1300+ cps with v.32bis and 900+ cps with v.32 on 50k+ news
batches (16-bit compressed).  This would not seem to support your theory,
at least on my machine.

  Of course, there are so many variables that can come into play with
telecommunications that it might take awhile to isolate what is causing
such low throughputs.  If you have an 80386DX at 25 Mhz or faster running
a single node, you *should* be able to get very close to the throughputs I
get consistantly.

  My system runs two nodes on a 40Mhz 80386DX with 16 Meg of RAM under
OS/2 2.0 with the Service Pack installed using Ray Gwinn's SIO/VSIO
drivers. Waffle 1.65 lives quite happily in a DOS session on node 2.

--
Internet: dalew@pdx.com                    P r a i s e   t h e   L o r d !
Home BBS: (503)335-9600 at 2400 - 9600 Bps using a 16.8k HST Dual Standard
          (503)335-3053 at 2400 - 14.4k Bps using an Intel 14.4EX
          Your friendly BlueWave and Waffle Beta/Distribution site