Article View: comp.bugs.2bsd
Article #1342.9 problems
From: OMSI
Date: Tue, 11 Nov 1986 23:57
Date: Tue, 11 Nov 1986 23:57
15 lines
1226 bytes
1226 bytes
I've recently undertaken the task of trying to bring up the seismo version of 2.9 (converting over from the original distribution). I get the system to come up, but when in multi-user mode, after a short while, I begin to get "out of swap" errors left and right. I've applied patches 1-16, and a few unnumbered ones, but none seem to relate to this problem. I vaguely recall some discussion about this a while back, but don't recall if anything was resolved. As a side note, I have a set of RL02 emulating drives (IOMEGA bernoulli box with TD systems controller). When the system tried to auto-configure these, it hangs. Removing the dtab entry allows me to boot and use them. Anyone else have this problem? Many thanks, Bob Ankeney tektronix!reed!omsi
Technical Details
Message-ID:
<4511@reed.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!mnetor!seismo!lll-crg!mordor!sri-spam!sri-unix!hplabs!tektronix!reed!omsiShow Full Headers
Complete Article Headers
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: arc1-ca.pugleaf.net!utzoo!mnetor!seismo!lll-crg!mordor!sri-spam!sri-unix!hplabs!tektronix!reed!omsi From: omsi@reed.UUCP (OMSI) Newsgroups: comp.bugs.2bsd Subject: 2.9 problems Message-ID: <4511@reed.UUCP> Date: Tue, 11-Nov-86 18:57:57 EST Article-I.D.: reed.4511 Posted: Tue Nov 11 18:57:57 1986 Date-Received: Wed, 12-Nov-86 02:17:05 EST Organization: Reed College, Portland OR Lines: 15