Thread View: comp.bugs.2bsd
1 messages
1 total messages
Started by Keith Bostic
Mon, 21 Sep 1987 16:15
2.10BSD
Author: Keith Bostic
Date: Mon, 21 Sep 1987 16:15
Date: Mon, 21 Sep 1987 16:15
62 lines
3016 bytes
3016 bytes
This is a follow-up to the recent 2.10BSD announcement,
to clarify its current state.
The USENIX Association has started shipping tapes.
They have provided informational packets to approximately 35
sites, and have requests for approximately 20 tapes. They
are currently having a minor problem with sites that are not
returning all the requested information, in particular, the
type of tape drive that will be used to boot from. Order
forms for 2.10BSD may also be found in the next issue of the
USENIX magazine, ``Login:''.
The networking is being shipped as part of the current
system. Hardware support is provided for the DEQNA, DEUNA,
Interlan, and SLIP. If anyone is interested in getting the
Pronet hardware support running, please contact me, I'd be
interested in seeing it done. The networking is NOT in
supervisor space, and will therefore run on any machine with
split I/D space. If anyone is interested in porting the
networking to supervisor space, please contact me, I'd be
interested in seeing it done.
Keith Bostic
------------------------------------------------------------
To recap, for anyone who has not yet seen this informa-
tion:
The USENIX association and the Computer Systems
Research Group (CSRG) of the University of California,
Berkeley, are pleased to announce the distribution of a new
release of the ``Second Berkeley Software Distribution''
(2.10BSD).
This release will be handled by the USENIX associa-
tion, and is available to all V7, System III, System V,
and 2.9BSD licensees. The Association will continue to
maintain the non-profit price of $200, as was charged by
the CSRG. The release will consist of two 2400 ft., 1600
bpi tapes (approximately 80M) and approximately 100
pages of documentation. If you require 800 bpi tapes,
please contact USENIX for more information.
If you have questions about the distribution of the
release, please contact USENIX. USENIX's address and
phone number is as follows:
USENIX Association
P.O. Box 2299
Berkeley, CA 94710
+1 415 528-8649
USENIX may also be contacted by electronic mail at:
{ucbvax,decvax}!usenix!office
If you have technical questions about the release, please contact
Keith Bostic at:
{ucbvax,seismo}!keith
keith@okeeffe.berkeley.edu
+1 415 642-4948
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads