🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

2 total messages Started by Rick Rodman Mon, 02 Jul 1990 02:34
2bsd for basement pdp-11/73??
#66
Author: Rick Rodman
Date: Mon, 02 Jul 1990 02:34
32 lines
1900 bytes
I was told to look here for information on obtaining a binary of 2bsd for
my PDP-11/73.

I rescued the little critter from a whole bunch of stuff that was destined to
be sold to a junk dealer.  The junkman ended up with two 11/34s and an 11/23,
plus several cartridge disk drives (RL01s?) and a couple of Interdata 7/32s.
I chose the 11/73 to rescue since (a) it was cute, looked like a Microvax and
(b) it was lightweight enough that I could *roll* it.

Anyhow, it came with RSX-11M and Basic Plus 2.  It has an RD53 and a TK50.

I have a price of $2000 from a couple of companies for unix for the thing
and even at that price they don't want to sell it because I don't have
9-track.  At that price I don't want to buy it either, since it's absurd.
Besides I'm just a lone programmer with a cute machine in his basement
(cue Sanford & Son theme).

Another common reply, by the way, has been "assuming you have a Unix source
license, you can get such-and-such, but otherwise jump in a lake".

Anyhow it's pretty strange that just about everybody supports the old Unibus
PDP-11's but almost nothing is available, even from DEC, for the 11/73 -
I think this machine is only about 3 years old!!!

I'd apparently have been better off with the PDP-11/34's!

Well, I suppose I have the answer to my question... Anyone have an extra
set of RSX-11M manuals (version 4.1) laying around?

-- 
Rick Rodman      uunet!virtech!rickr  (703)734-7261(w)  (703)330-9849(h)
Cable & Wireless, Tysons Corner VA
Re: 2bsd for basement pdp-11/73??
#67
Author: Terry Kennedy, Operations Mgr
Date: Mon, 02 Jul 1990 12:48
43 lines
2392 bytes
In article <1990Jul02.023456.5861@virtech.uucp>, rickr@virtech.uucp (Rick Rodman) writes:
> I was told to look here for information on obtaining a binary of 2bsd for
> my PDP-11/73.
> Another common reply, by the way, has been "assuming you have a Unix source
> license, you can get such-and-such, but otherwise jump in a lake".

  Well, if you can show that you _do_ have a Unix license, you can get the
complete kit from Usenix.

  The license is a prerequisite, though. That isn't Usenix's doing, nor
Berkeley's, but ATT's requirement.

  Non-BSD-related followups to this discussion should probably go elsewhere,
but I'm not sure where. Maybe the Info-PDP11 list at transarc.com?
 
> Anyhow it's pretty strange that just about everybody supports the old Unibus
> PDP-11's but almost nothing is available, even from DEC, for the 11/73 -
> I think this machine is only about 3 years old!!!

  Not true! You can still get RT-11, RSTS-E, RSX-11, and probably even IAS from
DEC. You'll need a license for any of those, however. On the back of your CPU
cabinet should be a "Model/Serial" tag giving the model and serial number. The
serial number will either be something like BTOnnnn or 8nnnnnnnx. Most PDP-11
systems were sold with a "general" license, which means that they were licensed
for the buyer's choice of operating system.

  If you contact your local DEC office, located at:

  Digital Equipment Corp. 
  3020 Hamaker Court
  Fairfax, VA 22031-2220
  (703) 698-5390

  You can arrange a "license transfer" which will make you legal for a DEC
operating system. Also, _if_ you can determine that the machine was licensed
for Ultrix-11 (you'd have to get proof from the old owner), you might be
able to use that as license proof for a binary 2BSD distribution.

  Hoping this helps,

	Terry Kennedy		Operations Manager, Academic Computing
	terry@spcvxa.bitnet	St. Peter's College, US
	terry@spcvxa.spc.edu	(201) 915-9381
Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads