🚀 go-pugleaf

V.35 Cables and Pin Assignments

Attach the V.35 monitoring and simulation cables to the MTYP interface
module to analyze 
V.35 lines.

The pin assignments for the V.35 cables are as follows:
Pin A		Protective Ground (Shield)
Pin B		Signal Ground
Pin C		Request To Send
Pin D		Clear To Send
Pin E		Data Set Ready	
Pin F		Data Carrier Detect
Pin H		Data Terminal Ready
Pin J		Ring Indicator
Pins P, S	Transmit Data
Pins R, T	Receive Data
Pins U, W	Transmit Clock (from DTE)

Pins V, X	Receive Clock
Pins Y, AA	Transmit Clock (from DCE)
Pin N		Remote Digital Loopback
Pin L		Local Analog Loopback
Pin NN		Test Mode

RS-530 Cables and Pin Assignments

Attach the RS-530 monitoring and simulation cables to the MTYP
interface module to 
analyze RS-530 lines.

The RS-530 cables have D-type 25 pin connectors. The pin assignments
for the RS-530 
cables are as follows:
Pin 1		Protective Ground (Shield)
Pins 2, 14	Transmit Data
Pins 3, 16	Receive Data
Pins 4, 19	Request To Send
Pins 5, 13	Clear To Send
Pins 6, 22	Data Set Ready	
Pin 7		Signal Ground
Pins 8, 10	Data Carrier Detect
Pins 9, 17	Receive Clock

Pins 11, 24	Transmit Clock (from DTE)
Pins 12, 15	Transmit Clock (from DCE)
Pin 18		Local Analog Loopback
Pins 20, 23	Data Terminal Ready
Pin 21		Remote Digital Loopback
Pin 25		Test Mode