Article View: comp.dcom.lans.ethernet
Article #1200Novell Lanalyzer
From: DEP
Date: Wed, 17 Feb 1993 21:45
Date: Wed, 17 Feb 1993 21:45
18 lines
1599 bytes
1599 bytes
We have three Novell Lanalyzer boards each installed in a Dolch 386 PC. We have used these devices for the last several years for network troubleshooting. Suddenly, over the last four months, all three units have developed an identical problem: the Novell Lanalyzer board will no longer supply enough voltage to an attached transceiver (ST500). It seems to work fine, however, when connected through an MT800, where, presumably, the power is supplied by the multiport transceiver itself. I'd be interested to know if anyone else has experienced this problem, or if anyone knows the spec with regard to the pin and voltage level so we could measure it. Don Pelton ( dep@slacvm.slac.stanford.edu ) Stanford Linear Accelerator Center Menlo Park, CA 94025 415/926-2901
Technical Details
Message-ID:
<93048.134544DEP@SLACVM.SLAC.STANFORD.EDU>Path:
arc1-ca.pugleaf.net!sparky!uunet!uvaarpa!caen!nigel.msen.com!emory!gatech!paladin.american.edu!howland.reston.ans.net!usc!sdd.hp.com!cs.utexas.edu!uwm.edu!linac!unixhub!slacvm!depShow Full Headers
Complete Article Headers
X-Google-Language: ENGLISH,ASCII-7-bit X-Google-Thread: fe659,995f70cdcf870448,start X-Google-Attributes: gidfe659,public X-Google-Thread: 10f035,995f70cdcf870448,start X-Google-Attributes: gid10f035,public X-Google-Thread: 1128fd,995f70cdcf870448,start X-Google-Attributes: gid1128fd,public X-Google-ArrivalTime: 1993-02-17 13:45:44 PST Path: arc1-ca.pugleaf.net!sparky!uunet!uvaarpa!caen!nigel.msen.com!emory!gatech!paladin.american.edu!howland.reston.ans.net!usc!sdd.hp.com!cs.utexas.edu!uwm.edu!linac!unixhub!slacvm!dep Organization: Stanford Linear Accelerator Center Date: Wednesday, 17 Feb 1993 13:45:44 PST From: <DEP@SLACVM.SLAC.STANFORD.EDU> Message-ID: <93048.134544DEP@SLACVM.SLAC.STANFORD.EDU> Newsgroups: comp.dcom.lans.ethernet,comp.sys.novell,bit.listserv.novell Subject: Novell Lanalyzer Lines: 19