Need help with NetBuilder 221

Thread View: comp.dcom.lans.ethernet

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Mike West Wed, 29 Aug 2001 03:37

#1158

Author: Mike West
Date: Wed, 29 Aug 2001 03:37

16 lines
1769 bytes

I acquired a NetBuilder model 221 Boundary Router and have been playing
around with it.  I managed to upgrade the OS on it from 9.0 to 10.1.  I was
hoping I could use this thing to bounce some routes against some other
routers I have in my practice lab.  But, I'm having problems find real good
info on this thing.  I'm find some folks who are saying this router can't do
'full routing'.  I'm finding some folks that say there is a software upgrade
that will allow the 221 to do 'full routing'.  I can see a RIP option in the
current 10.1 OS.  If I go into the IP parameters and try setting the control
to 'Route', it says that's not possible while in Boundary Mode.  With no
documentation and find few other resources, I'm hoping someone can shed some
light on this beast.  Can it be upgrade to do OSPF, BGP, and RIP routing?
Can I at least do RIP?

Thanks in advance,

Mike

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads