3Com OCR530 w/ mlppp help....

Thread View: comp.dcom.lans.ethernet

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Joe Garner Thu, 06 Mar 1997 00:00

#1173

Author: Joe Garner
Date: Thu, 06 Mar 1997 00:00

29 lines
1839 bytes

I've got a 3com Office connect 530 router that I'm trying to get to work
on mlppp.  If I enable demand, (co po ed po) then during large downloads
the second b channel picks up and drops every few seconds.  This is with
PPP MP disabled!  If I enable PPP MP (co is nu ed) I can connect, but
cant seem to get any data!  ie, if I hit reload ( in Netscape) the isdn
utilization leds light up, but the screen stays blank.  Now I'm using
only one channel with demand and pppmp disabled, works great except I'd
like to get the 2nd channel....

I'm using the latest firmwear V 5.03g, 3Com says mlppp should work
after  V5.03.  

I've gone over the 3com customer support articles on enableing mlppp
without any luck.

Any ideas on what I'm missing?  Any help would be welcome.


TIA, Joe
-- 
if you reply via email remove the antispam charactor ($) from the
address.

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Joe Garner                              IASEL-N35 Bonanza@OAK
jgarner@elelink.xo.com                            \ /       
kc6utr@w6pw                            .__________(0)__________. 
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads