Serial<-->Fiber converters?

Article View: comp.dcom.lans.fddi

Article #313

Back to comp.dcom.lans.fddi Previous Next

#313

From: Adam Hahn
Date: Thu, 19 Nov 1992 18:34

8 lines
803 bytes

Hey-
  I'm not sure if this is the right newsgroup, but I've run into a problem getting 2 serial-to-fiber converters working...
The two converters are:
      Greenwich Instruments Ltd. RS232C Monofibre GFO232DTE/GFO232DCE
 and  Telebyte Technology Inc. Auto-powered Fiber Line Driver Model 271F/ST
Does anyone out there have experience with these two?  Any docs or suggestions you could give?
Advancethanx,
Adam Hahn

Technical Details

Message-ID: <Bxz7L2.FFF@ra.nrl.navy.mil>

Path: arc1-ca.pugleaf.net!sparky!uunet!gatech!emory!wupost!darwin.sura.net!ra!grizzly!hahn

Show Full Headers

Complete Article Headers

Newsgroups: comp.dcom.lans.fddi
Path: arc1-ca.pugleaf.net!sparky!uunet!gatech!emory!wupost!darwin.sura.net!ra!grizzly!hahn
From: hahn@grizzly.nrl.navy.mil (Adam Hahn )
Subject: Serial<-->Fiber converters?
Message-ID: <Bxz7L2.FFF@ra.nrl.navy.mil>
Sender: hahn@grizzly (Adam Hahn )
Organization: U.S. Naval Research Laboratory, Washington D.C.
Date: Thu, 19 Nov 1992 18:34:13 GMT
Lines: 9