Thread View: comp.dcom.lans.fddi
2 messages
2 total messages
Started by Larry Riffe II
Wed, 18 Nov 1992 21:51
FDDI standards
Author: Larry Riffe II
Date: Wed, 18 Nov 1992 21:51
Date: Wed, 18 Nov 1992 21:51
16 lines
900 bytes
900 bytes
I was wondering if anybody could tell me what the most current
revision of the following FDDI standards was and where I might
be able to get them. Also if anybody knows if work is currently
going on, on the standards and a new revision will be released
soon (ie, the next six months), I would appreciate that information
as well.
MAC PHY
PMD SMT
HRC SMF-PMD
Thanks,
Larry G. Riffe II
lriffe@ariel.unm.edu
Re: FDDI standards
Author: Mike Yip
Date: Thu, 19 Nov 1992 19:19
Date: Thu, 19 Nov 1992 19:19
25 lines
1390 bytes
1390 bytes
In article dvlqcxh@lynx.unm.edu, lriffe@isis.unm.edu (Larry Riffe II) writes: > > I was wondering if anybody could tell me what the most current > revision of the following FDDI standards was and where I might > be able to get them. Also if anybody knows if work is currently > going on, on the standards and a new revision will be released > soon (ie, the next six months), I would appreciate that information > as well. Looking at the documents on my desk (meaning I am not sure if it is the absolute latest doc). Document Current Furture SMT 7.2 June 25, 1892 None (See SMT-2) SMT-2(?) 0.01 Oct 1892 -- This is a working copy, not a standard or even draft HRC 6.3 May 28, 1892 PHY-2 5.0 June 17, 1892 ;) --- | Michael Yip Email: my@berlioz.nsc.com | National Semiconductor Corp Voice: (408) 721-5148 | | Of course, this is my own opinion!
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads