N/W dimensioning & ATM /FDDI

Thread View: comp.dcom.lans.misc

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Martin Visser Fri, 14 May 1993 22:49

#370

Author: Martin Visser
Date: Fri, 14 May 1993 22:49

29 lines
2425 bytes

We have a large geopgraphic LAN site (25 sq.km) with some 3000 devices in our
network( incl. Mainframes. minis, PC's PLCs, terminals etc.). We are currently 
using broadband technology, but realise that this
is losing market and vendor support.

Firstly we need to analyse our network needs. We are currently determining what
services are required. However we need techniques, rules of thumb , tools etc.
to put paramters and dimensions that would help us decide on appropriate
technologies and topologies etc. We have come up with some N squared matrix
and other ways of quantifying this but I would like to hear from others
with large campus networks that may have had similar experience in analysing
their networking needs.

It is obvious that fibre optic technology is going to be the way to go.
Is there any information, reviews, critiques, etc on technologies such as ATM
and FDDI?

Your help would be appreciated.

-- 
Regards, Martin

   /\/\     :  Martin Visser - Electrical / Software Engineer 
  / / /\    :  Engineering Technology Department
 / / /  \   :  BHP Steel - Slab and Plate Products Division
/ / / /\ \  :  P.O. Box 1854 Wollongong NSW 2500 AUSTRALIA
\ \/ / / /  :  Phone    +61-42-75-7522 ext. 6207
 \  / / /   :  Fax      +61-42-75-7038 
  \/\/\/    :  E-mail   visser@n6batws1.itwol.bhp.com.au

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads