connection to internet

Thread View: comp.dcom.lans.novell

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by Sam Craghead Mon, 08 Jan 1996 00:00

#64

Author: Sam Craghead
Date: Mon, 08 Jan 1996 00:00

33 lines
1827 bytes

My company is interested in establishing connections for its users on LANs
located in 6 cities in the U.S. to the Internet.

We are going to connect these sites using Frame Relay and a combination of 56kb
and T1 lines to the locations.

We have a total of 7 IP Class C addresses which have been assigned to insure
we can use the Internet.

There is a Novell network in each of these locations consisting of v3.11,
v3.12, and v4.1. A couple of the sites have v3.12 and v4.1 servers.


I am interested in learning the following:

1) What do we use to enable the users (IPX/SPX) to communicate via the
   IP address assigned to each site to communicate over the Internet?  In
   otherwords, how do I make this connection to the Internet usable by each
   user attached to the NetWare networks.

2) How do we connect outside users so they may use Internet services?

3) How do we protect our Novell servers from unauthorized access?

I would appreciate any "case studies" from those who have already done this
and would be willing to share techniques and problems, and how those problems
were solved.

Thank You

Sam

scrag@cts.com

Re: connection to internet

#63

Author: Jerzy Tarasiuk
Date: Wed, 10 Jan 1996 00:00

21 lines
1725 bytes

In article <4crsmc$amg@news3.cts.com> scrag@crash.cts.com (Sam Craghead) writes:

>My company is interested in establishing connections for its users on LANs
>located in 6 cities in the U.S. to the Internet.

>1) What do we use to enable the users (IPX/SPX) to communicate via the
>   IP address assigned to each site to communicate over the Internet?  In

Seems while it is possible to connect NetWare server to Internet, it is
still no program which would help use the connection for communication
between workstation and the Internet; it is possible access server only
from Internet. If you want to access Internet, use program named IPXPKT
(PD, available on Simtel) - its documentation says everything you need.

>2) How do we connect outside users so they may use Internet services?

You can run Internet (FTP,SMTP,FINGER) servers on NetWare server.

>3) How do we protect our Novell servers from unauthorized access?

FTP server has same protection as user accounts.

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads