🚀 go-pugleaf

	I installed the NetWare Requester for OS/2 on a Compaq DeskPro
	33/i.  The computer has a DCA Irma card.  I could log into the
	server (Campaq SystemPro, NW v3.11, 100pack, Token Ring LAN) and
	use all the OS/2 utilities (Syscon, Pconsole etc).  But the capture
	command is giving me trouble.  I cannot print anything.
	I am enclosing the error message and other corresponding files.  I 
	am new to OS/2 and I am not sure if I am looking at the right files 
	so if any of you have any experience with this kind of environment 
	or know what's going on please do reply.

	Thanks a lot,

	Eman.
	ps: The OS/2 was installed with a dual boot feature.  I selected
		the printer driver for HP LaserJet Series II.  

*******
<Command> capture /s=hcd01 /l=1 /q=hp2_1@dp /nff /nb /noti 
  the above command is an approximate  not the exact but I covered the
  important ones.
********
********
  I get this error message and a confirmation in the end.

NWSpoolStartCapture returned error 0x8835.
NWSpoolSetPrintJobFlags returned error 0x8835.
Device LPT1: re-routed to queue HP2_1@DP on server HCD01.
********
********
Output of "Capture /sh" right after the above command

LPT1:  Capturing Is Not Currently Active.

LPT2:  Capturing Is Not Currently Active.

LPT3:  Capturing Is Not Currently Active.
*********
*********
The file Config.sys

PROTSHELL=C:\OS2\PMSHELL.EXE C:\OS2\OS2.INI C:\OS2\OS2SYS.INI C:\OS2\CMD.EXE
SET COMSPEC=C:\OS2\CMD.EXE
LIBPATH=C:\OS2\DLL;C:\MUGLIB\DLL;C:\;C:\NETWARE;C:\NETMAN\DLL;
SET PATH=C:\OS2;C:\MUGLIB;C:\OS2\SYSTEM;I:\OS2;C:\OS2\INSTALL;C:\;C:\NETWARE;C:\NOVELL;C:\NETMAN\EXEC;
SET DPATH=C:\OS2;C:\MUGLIB\DLL;C:\OS2\SYSTEM;C:\OS2\INSTALL;C:\;C:\NETWARE;C:\NETMAN\DBASE;
SET PROMPT=$i[$p]
SET HELP=C:\OS2\HELP;C:\NETMAN\EXEC;
BUFFERS=60
IOPL=YES
DISKCACHE=64
MAXWAIT=3
MEMMAN=SWAP,MOVE,SWAPDOS
PROTECTONLY=NO
SWAPPATH=C:\OS2\SYSTEM 512
THREADS=255
COUNTRY=001,C:\OS2\SYSTEM\COUNTRY.SYS
DEVINFO=SCR,VGA,C:\OS2\VIOTBL.DCP
SET VIDEO_DEVICES=VIO_IBMVGA
SET VIO_IBMVGA=DEVICE(BVHVGA)
DEVICE=C:\OS2\POINTDD.SYS
DEVICE=C:\OS2\MSPS201.SYS
DEVICE=C:\OS2\MOUSE.SYS TYPE=MSPS2$
DEVICE=C:\OS2\PMDD.SYS
SET KEYS=ON
SET BOOKSHELF=C:\OS2\BOOK;
SHELL=C:\OS2\COMMAND.COM /P
BREAK=OFF
FCBS=16,8
RMSIZE=640
DEVICE=C:\OS2\EGA.SYS
DEVICE=C:\OS2\DOS.SYS
DEVINFO=KBD,US,C:\OS2\KEYBOARD.DCP
CODEPAGE=437,850
DEVICE=C:\OS2\COM01.SYS

REM --- NetWare Requester statements BEGIN ---

DEVICE=C:\NETWARE\LSL.SYS
RUN=C:\NETWARE\DDAEMON.EXE
DEVICE=C:\NETWARE\IRMATRAC.SYS
DEVICE=C:\NETWARE\IPX.SYS
DEVICE=C:\NETWARE\SPX.SYS
DEVICE=C:\NETWARE\ROUTE.SYS
RUN=C:\NETWARE\SPDAEMON.EXE
rem DEVICE=C:\NETWARE\NMPIPE.SYS
rem DEVICE=C:\NETWARE\NPSERVER.SYS
rem RUN=C:\NETWARE\NPDAEMON.EXE NP_COMPUTERNAME
DEVICE=C:\NETWARE\NWREQ.SYS
IFS=C:\NETWARE\NWIFS.IFS
RUN=C:\NETWARE\NWDAEMON.EXE
rem DEVICE=C:\NETWARE\NETBIOS.SYS
rem RUN=C:\NETWARE\NBDAEMON.EXE
rem RUN=C:\NETWARE\NWSPOOL.EXE

REM --- NetWare Requester statements END ---

************
************
The file Autoexec.bat

SET NMS=C:\NETMAN\DBASE
SET BTRPARMS=/M:48 /P:4096 /U:2 /F:100 /T:C:\NETMAN\BTREIVE.TRN
PATH C:\OS2;C:\OS2\SYSTEM
APPEND C:\OS2;C:\OS2\SYSTEM
SET COMSPEC=C:\OS2\COMMAND.COM
CALL HELP ON
COPY C:\OS2\COMMAND.COM C:\ >NUL
************