🚀 go-pugleaf

I was tring differnt SCSI configurations with the Adaptec 2940, which 
Im waiting for new bios, Had nothing but problems tring to install with 
a CDrom. Then after puting in the 1540 back in and bringing up the server 
it hung and had to be rebooted (waaa). Now it boots  with no errors and 
does not recognize the network. Ive changed NICs (NE2000) loads, Binds, 
and IRQ's are all at default. I changed drivers spent many hours tring 
various things then reinstalled and still would not see the network. It also 
has a Hub that the light is lit there. 10 baseT cable, lite at NIC is lit. 
NE2000 clone, that loads and binds without error. Question,NE2000 base 
add is defaulted to undefined but still loads properly is that ok?      

        Also I am useing INETCFG instead of autoexec.ncf. Type protocals and it says 
Virtual Lan, ETH. 802.2, EHT. 802.3.  Type Config and it says IPX is bound 
internal net#fa7d19e5 with a node add of 00000000001  to Virtual Lan.?? 
and the NIC is bound to net#42e2e671 for Frame 802.3 and net #9f258f4b for 
802.2 with the same node # 0040c71104ab.  Is this suppose to be the same 
node # as the Internal Binds node add?And Is Virtual Lan correct?

Please help 

Rich
<A HREF = "mailto://rsilva@a.crl.com">rsilva@a.crl.com</A>