🚀 go-pugleaf

That's the same with my USB 10mbit card.  In the "OLD" days all of this was
done with special utiities, but it's possible that your NIC is only half
duplex capable, so nothing to change.


"Matt" <mwalcoff@onecom.com> wrote in message
news:3BA151D2.8996AF14@onecom.com...
> The only thing under the Advanced tab is "maximum transmits." I'll search
for my
> old card utility. Thanks -- Matt
>
> Vaughn wrote:
>
> > I'm guessing your using win9x.    Go to desktop, highlight network.
Right
> > click, select properties. Highlight your nic and select properties.
Under
> > advanced tab select "connection type"  there will be a value to the
right,
> > change from auto sense or whatever is there to 10mb/half duplex.  I
dont'
> > have a plan 10mb card so I can't help there.  You may have to do it with
a
> > utility from you card manufacturer if the card is old enough.
> >
> > "Matt" <mwalcoff@onecom.com> wrote in message
> > news:3BA011C5.5F1D5666@onecom.com...
> > > Thanks for the help, but I can't find a half-duplex/full-duplex
setting in
> > any
> > > Control Panel window. -- Matt
> > >
> > > Brian wrote:
> > >
> > > >    Try making sure your NIC is set to half duplex. If you go to your
> > network
> > > > properties and click on the NIC card, then choose properties, you
should
> > be
> > > > able to set this property to 10Mb/half duplex. It may be trying to
run
> > full
> > > > duplex. When I try to run mine at full duplex, it will only load
most
> > pages
> > > > about half way as well, but I'm able to pull e-mail okay, although a
> > little
> > > > slow. Also, if you can pull up this web page, go to
www.speedguide.net
> > and
> > > > try checking your registry settings against their suggestions.
> > > >
> > > > Matt wrote:
> > > >
> > > > > I am having trouble with my new cable modem service. Whenever I
> > request
> > > > > a Web page, it loads up only the first 10 KB or so -- the
background
> > or
> > > > > the very top of the page, if anything -- then stalls. However, I
have
> > > > > been able to use e-mail without problems and am doing OK with
Usenet,
> > > > > although it stalled after loading 700 or so message headers. I
tried
> > > > > uninstalling Netscape and putting on the version of Internet
Explorer
> > > > > provided with the modem, but that did not help.
> > > > >
> > > > > The problem may have something to do with the age of my
computer --
> > it's
> > > > > an old P150 with 16MB of RAM. On the other hand, in the past I ran
> > ISDN
> > > > > on this computer with no problems, and I read one post from
someone
> > who
> > > > > says he uses a 33Mhz 486.
> > > > >
> > > > > I e-mailed the cable-modem people, and they said the following:
> > > > >
> > > > > "Your modem is operating very well. The levels are very good, and
your
> > > > > area is not having any connectivity issues. Since you have an old
PC,
> > > > > with only 16 MB RAM, we recommend leaving some free space on your
hard
> > > > > drive for swap files. If you can afford to gets more system
memory, we
> > > > > recommend upgrading the RAM to at least 32 MB."
> > > > >
> > > > > I tried clearing 250MB of disk space, but that did nothing. Radio
> > Shack,
> > > > > the only nearby place I knew of, only carried RAM in 128MB, which
I
> > > > > don't think would even fit in my computer and would cost about
Can$60.
> > > > > Before I make that purchase, go searching around town for a 32MB
RAM
> > > > > upgrade or turn in my cable modem, I'd like to know if there's
> > anything
> > > > > else I can try first.
> > > > >
> > > > > Thanks for your help.
> > >
>