Re: Re:Re: LAT Bridging

Article View: comp.dcom.sys.cisco

Article #115

Back to comp.dcom.sys.cisco Previous Next

#115

From: oberman
Date: Mon, 10 Aug 1992 15:43

18 lines
1353 bytes

In article <9208091828.AA05968@ash.cisco.com>, gkunis@cisco.com (Gary Kunis) writes:
> 
> The codes for MOP and reverse MOP are 6001 and 6002.  The code for
> LAVC is 6007.  Enjoy

6001 is the protocol type for MOP/DL used for Down Loading. 6002 is MOP/RC used
for Remote Console operations. I have no idea what reverse MOP would be.

To download, only 6001 (MOP/DL) is needed. For connecting a pseudo-terminal to
a device, MOP/RC is needed. Not all devices use both, but terminal servers do.
MOP/DL is needed to load the devices and MOP/RC for either TSM or NCP CONNECT
operations. LAVc nodes use MOP/DL to load but have no use for MOP/RC.

R. Kevin Oberman			Lawrence Livermore National Laboratory
Internet: koberman@llnl.gov		(510) 422-6955

Disclaimer: Don't take this too seriously. I just like to improve my typing
and probably don't really know anything useful about anything.

Technical Details

Message-ID: <1992Aug10.074357.1@ptavv.llnl.gov>

Path:

arc1-ca.pugleaf.net!sparky!uunet!cis.ohio-state.edu!pacific.mps.ohio-state.edu!linac!att!pacbell.com!iggy.GW.Vitalink.COM!lll-winken!ptavv.llnl.gov!oberman

References: <9208091828.AA05968@ash.cisco.com>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!cis.ohio-state.edu!pacific.mps.ohio-state.edu!linac!att!pacbell.com!iggy.GW.Vitalink.COM!lll-winken!ptavv.llnl.gov!oberman
From: oberman@ptavv.llnl.gov
Newsgroups: comp.dcom.sys.cisco
Subject: Re: Re:Re: LAT Bridging
Message-ID: <1992Aug10.074357.1@ptavv.llnl.gov>
Date: 10 Aug 92 15:43:57 GMT
References: <9208091828.AA05968@ash.cisco.com>
Sender: usenet@lll-winken.LLNL.GOV
Lines: 18
Nntp-Posting-Host: ptavv.llnl.gov

Reply to Parent Message