Re: High speed serial interface

Article View: comp.dcom.sys.cisco

Article #132

Back to comp.dcom.sys.cisco Previous Next

#132

From: Ken Stone
Date: Tue, 28 Jul 1992 04:04

13 lines
975 bytes

In article <3202@ariadne.csi.forth.GR> antonis@helios.ntua.gr (Antonis Kyriazis) writes:
>I'd like to ask how one can use the high speed serial interface of a router
>at a really high speed (4 or 8 Mbps)?
>I've never seen a modem playing higher than 2 Mbps (E1, G.703)...

I have a link here where we use Digital Link DL3000 muxes to break up a T3
microwave link ... one of the pieces is a ~32Mbit data channel between two
AGS+'s on HSSI.

Several companies now sell HSSI to T3 "modems" if you want to call them that.
I think the term DSU is probably more correct ...

  -- Ken

Technical Details

Message-ID: <152h0fINN2bm@hpsdlz.sdd.hp.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!cs.utexas.edu!sdd.hp.com!nobody

References: <3202@ariadne.csi.forth.GR>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!cs.utexas.edu!sdd.hp.com!nobody
From: ken@sdd.hp.com (Ken Stone)
Newsgroups: comp.dcom.sys.cisco
Subject: Re: High speed serial interface
Date: 27 Jul 1992 21:04:31 -0700
Organization: Hewlett Packard, San Diego Division
Lines: 13
Message-ID: <152h0fINN2bm@hpsdlz.sdd.hp.com>
References: <3202@ariadne.csi.forth.GR>
NNTP-Posting-Host: hpsdlz.sdd.hp.com

Reply to Parent Message