Re: X.25 Tunneling

Article View: comp.dcom.sys.cisco

Article #1767

Back to comp.dcom.sys.cisco Previous Next

#1767

From: WilliamChops Westfield
Date: Sat, 15 Jun 1991 00:13

16 lines
950 bytes

    As I recall, cisco used to support an undocumented command which
    permitted the encapsulation of X.25 packets into IP datagrams for
    transport over an internetwork.  Is this command still supported,
    and if so, what is its syntax ?

The command is documented.  Only the protocol is undocumented.  As long
as you have a cisco on either side of the IP Internetwork, you will be
able to get it to work just fine (and it is a standard feature of the X.25
support in the cisco routers.)

See the manual section on "x25 routing" or maybe "x25 switching".

Bill Westfield
cisco Systems.
-------

Technical Details

Message-ID: <36042@boulder.Colorado.EDU>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!asuvax!ncar!csn!boulder!daemon

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!asuvax!ncar!csn!boulder!daemon
From: BILLW@mathom.cisco.com (WilliamChops Westfield)
Newsgroups: comp.dcom.sys.cisco
Subject: Re: X.25 Tunneling
Message-ID: <36042@boulder.Colorado.EDU>
Date: 15 Jun 91 00:13:35 GMT
Sender: daemon@boulder.Colorado.EDU
Lines: 16