🚀 go-pugleaf

Dan,

In response to your query...

------------------------------------------------------------------
>The cisco is currently routing one subnet of the bridged network to
>the second ethernet.  That leaves me with two problems for the other
>subnets.  Routing them to the outside world and routing between them.
>Can I get my cisco to solve these problems using secondary addresses
>or some such.
-------------------------------------------------------------------
The Cisco s/w offers you the capability of supporting more than
one subnet on an ethernet segment.  You can use the secondary address
facility to handle the problem of handling more than one subnet
on an Ethernet segment.

Here is an example:

interface ethernet 0
ip address 130.12.2.1 255.255.255.0
ip address 130.12.34.1 255.255.255.0 secondary
ip address 130.12.161.1 255.255.255.0 secondary
ip address 192.12.34.1 255.255.255.0 secondary

as you can see, we have handled addressing for 3 subnets of the
class B and for a class C located on the same Ethernet segment.

 -- Gary --          
:wq