🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.dcom.sys.cisco
Article #1872

AppleTalk routing

#1872
From: John Kennedy
Date: Wed, 06 Jan 1993 07:17
29 lines
1387 bytes
  Does anyone know of a way to get a AGS+ [running 9.1(1.5) ROMs, 9.1(2.1)
soon] to be more assertive with AppleTalk routing?

  A general setup for one of our interfaces is:

	appletalk routing
	appletalk lookup-type FastPath
	appletalk name-lookup-interval 30
	no appletalk permit-partial-zones

	interface Ethernet 1
	ip address 132.241.200.1 255.255.255.0
	ip helper-address 132.241.200.10
	appletalk cable-range 12080-12080 12080.1
	appletalk zone CHI_Campus subnet TEST
	appletalk send-rtmp
	novell network 2
	no novell route-cache
	no shutdown

  Now, by "assertive" I mean that it's willfully intolerant about the way
other AppleTalk devices are configured.  When it boots up, it doesn't care
about other AppleTalk devices, it doesn't verify it's configuration with
them, it doesn't cut itself off if someone disagrees, etc etc.  Suggestions?

-- 
p'ch'zarni'chiwkov:  the nasty little sound of a sword being unsheathed right
behind one at just the point when one thought one had disposed of one's enemies.
Technical Details
Message-ID: <1ie11jINNe6b@charnel.ecst.csuchico.edu>
Path: arc1-ca.pugleaf.net!sparky!uunet!olivea!charnel!warlock

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!sparky!uunet!olivea!charnel!warlock
From: warlock@ecst.csuchico.edu (John Kennedy)
Newsgroups: comp.dcom.sys.cisco
Subject: AppleTalk routing
Message-ID: <1ie11jINNe6b@charnel.ecst.csuchico.edu>
Date: 6 Jan 93 07:17:07 GMT
Organization: California State University, Chico
Lines: 29
NNTP-Posting-Host: amber.ecst.csuchico.edu