Re: IGRP information on interfaces with secondary address

Article View: comp.dcom.sys.cisco

Article #1900

Back to comp.dcom.sys.cisco Previous Next

#1900

From: Tony Li
Date: Sat, 09 Jan 1993 02:17

23 lines
1303 bytes

In article <C0Ip95.Cr8@orfeo.radig.de> Peter Radig
<peter@orfeo.rhein-main.de> writes: 
    The configuration is a AGS running 9.0(1) / 9.0(2.6) / 9.1(1.3) 
    
    	interface serial 3
    	encapsulation x25
    	ip address 192.125.1.9 255.255.255.252 secondary
    	ip address 192.125.253.2 255.255.255.0
    
    The reason I found was that all IGRP pakets send via broadcast on
    this interface had the secondary address as sender. 

I'm unable to reproduce this problem whatsoever.  Please send your full
configuration to tac@cisco.com.

Thanks,
Tony

-- 
abyss \*-'bis\ n 
  1 : the bottomless gulf, pit, or chaos of the old cosmogonies  2 a : an 
  immeasurably deep gulf or great space  b : intellectual or spiritual 
  profundity; also : vast moral depravity 3 a Border Intermediate System

Technical Details

Message-ID: <1ilck0INN36v@cronkite.cisco.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!cs.utexas.edu!sun-barr!ames!cronkite.cisco.com!tli

References: <C0Ip95.Cr8@orfeo.radig.de>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!cs.utexas.edu!sun-barr!ames!cronkite.cisco.com!tli
From: tli@cisco.com (Tony Li)
Newsgroups: comp.dcom.sys.cisco
Subject: Re: IGRP information on interfaces with secondary address
Date: 9 Jan 1993 02:17:35 GMT
Organization: cisco Systems, Menlo Park, California, USA
Lines: 23
Message-ID: <1ilck0INN36v@cronkite.cisco.com>
References: <C0Ip95.Cr8@orfeo.radig.de>
NNTP-Posting-Host: lager.cisco.com
Keywords: igrp, x25, secondary address, 9.0, 9.1

Reply to Parent Message