🚀 go-pugleaf

On Thu, 13 Mar 1997 16:11:12 -0600, sandals@candw.ag wrote:

>I have a Netware 3.12 server with two IP bounded network cards.
>Both cards have unique IP addresses. My problem is that only the
>segment physically connected to my SCO Unix server can access the
>SCO unix server. However the workstations on the segment that I
>have name Front cannot access the SCO server.
>
>From the SCO server side, if I do a ping on both network cards on
>my Novell server, it can communicate with them. If I physically
>connect the network called front to my SCO server, I can log into
>it. However, trying to connect both cards to the same SCO server
>causes me to get a router configuration error at the Novell
>console.
>
>Loading TCPCON shows me that ip traffic is being received and
>Transmitted. However IPForwards always equals 0 and there is no TCP
>traffic.
>
>At the workstation end I am using dejatnt. The workstation internet
>address is being set using custom netdev or bootttp.
>
>
>
>Any help with this problem will be appreciated.
>
>-------------------==== Posted via Deja News ====-----------------------
>      http://www.dejanews.com/     Search, Read, Post to Usenet
Do you try with LOAD TCPIP forward=yes?