🚀 go-pugleaf

In article <6lrv0h$qt8$1@eve.enteract.com>, pschuman.NOSPAM@symons.com
(Phil Schuman) wrote:

> we have a LAN using the 192.168.x.x reserved IP address space - 
> 
> our cisco 2501 router is sitting at 192.168.1.1
> and each segment is 192.168.10.1 or 20.1 or 30.1 etc
> we are using static IP routes for all locations.
> our local WIN95 desktops have 192.168.1.1 as the IP gateway address.
> 
> Now - how can we add an ISDN router to our LOCAL network 
>         for connecting on demand to a local ISP ??
> 
> #1 - how can multiple gateway addresses be used in WIN95 ??
>         I see they can be input - but how would that work ??
> 
> #2 - how can I spec in the 2501 "another gateway" for unresolved paths ??
>         
> any other ideas or comments on how to add a ISDN router to the network 
>         as the 2nd router ??

Your description is a little vague in terms of what the 2501 is doing
right now--I'm assuming that it is not routing anything to the Internet in
the status quo.

If that's the case, the answer's easy.  Just set up a route on the 2501 like so:

ip route 0.0.0.0 0.0.0.0 192.168.X.X

X.X should be the rest of the address for the ISDN router.  The 2501 will
send stuff that it doesn't know what to with to the ISDN router, which
should in turn hand it off to your upstream ISP.

Or maybe I'm just missing a piece of the puzzle here...

Jordyn