🚀 go-pugleaf

Marc,

Why go from ADSL modem to Cisco ISDN Router? Or do you wish to replace the
Alcatel by a Cisco?

Vincent


"Marc Ballat" <marc.ballat@do.you.care> wrote in message
news:3ADE8EDB.6279CF67@do.you.care...
> Hello,
>
> I live in Belgium and have an ISDN line (Euro ISDN BRI).  The national
> telco (Belgacom) provided me with an NT from Alcatel called Twin Box.
>
> I recently took ADSL and the hardware I got was an Alcatel modem for
> ISDN as well as a splitter to connect it to the NT.
>
> I would like to buy me a router but I am confused by the poor
> documentation found on Cisco's site or even provided by their support
> here.
>
> 1. On Cisco's site (http://www.cisco.com/warp/public/cc/pd/rt/800/), the
> 826 is said to have 'One ISDN, one ADSL interface' though their printed
> docs states it is 'one ADSL over ISDN'.  So what is it ?
>
> 2. In my case, should I buy a 826 or 827 since I have an ISDN line ?
>
> 3. Flash upgrade : they both come standard with 8 MB flash.  Once again
> the doc on Cisco's site
> (http://www.cisco.com/univercd/cc/td/doc/pcat/827.htm) states that I
> cannot upgrade further if it already has 8 MB...  Does it mean I have to
> remove the existing flash card and put a 16 MB one to reach 16 MB flash
> ?  Isn't it possible then to order it without flash since I can't do
> anything with the original 8 MB if I have to remove it...
>
> I am quite lost, are you ;o)
>
> Thanks in advance, Marc