🚀 go-pugleaf

Hi

anyone know if cisco catalyst 6500 with sup2/msfc2/pfc2
can support VPLS ?

because i have:


c6509-1#sh mpls l2transport vc 135 detail
Local interface: VFI Internet up
   Destination address: 172.20.10.1, VC ID: 135, VC status: down
     Tunnel label: not ready, LFIB entry present
     Output interface: unknown, imposed label stack {}
   Create time: 00:15:31, last status change time: 00:13:31
   Signaling protocol: LDP, peer 172.20.10.1:0 up
     MPLS VC labels: local 23, remote 24
     Group ID: local 0, remote 0
     MTU: local 1500, remote 1500
     Remote interface description:
   Sequencing: receive disabled, send disabled
   VC statistics:
     packet totals: receive 0, send 0
     byte totals:   receive 0, send 0
     packet drops:  receive 0, send 0


c6506-2#sh mpls l2transport vc 135 detail
Local interface: VFI Internet up
   Destination address: 172.20.10.2, VC ID: 135, VC status: down
     Tunnel label: not ready, LFIB entry present
     Output interface: unknown, imposed label stack {}
   Create time: 00:18:41, last status change time: 00:15:26
   Signaling protocol: LDP, peer 172.20.10.2:0 up
     MPLS VC labels: local 24, remote 23
     Group ID: local 0, remote 0
     MTU: local 1500, remote 1500
     Remote interface description:
   Sequencing: receive disabled, send disabled
   VC statistics:
     packet totals: receive 0, send 0
     byte totals:   receive 0, send 0
     packet drops:  receive 0, send 0

c6506-2#sh mpls l2transport vc

Local intf     Local circuit        Dest address    VC ID      Status
-------------  -------------------- --------------- ---------- ----------
VFI Internet   VFI                  172.20.10.2     135        DOWN




thanks for your help