Re: AGS fan noise

Article View: comp.dcom.sys.cisco

Article #225

Back to comp.dcom.sys.cisco Previous Next

#225

From: Richard Letts
Date: Tue, 18 Aug 1992 08:02

27 lines
1432 bytes

Danny Sheaffer writes....
> 
> Greetings
>  
> Does anyone know of a way to reduce the noise produced by the fan on an AGS?
>  
> Danny Sheaffer
> danny@dir.texas.gov
> 
One of our cisco's is encased in a large metal cabinet, filled with
acoustic damping wadding. The air vents have been let unblocked (or it
turns itself off).
This is the quietest AGS+ on campus. Adding the acoustic damping to
the cabinet also improved the air-flow inside the cabinet (it no
longer circulates in the space above the router).

Try a commercial sound/audio company for a suitable source of wadding
I don't have the address for our supplier, as the department where this 
router is located donated the wadding, and we fitted it.

Richard
-- 
Richard Letts			My opinions are my own, and do not necessarily
Network Manager                 reflect those of my employer
University of Salford               Email: R.J.Letts@salford.ac.uk
United Kingdom			    Phone : +44 61 745 5252
United States of Europe

Technical Details

Message-ID: <199208180815.AA16009@spot.Colorado.EDU>

Path: arc1-ca.pugleaf.net!sparky!uunet!sun-barr!ames!agate!boulder!recnews

Show Full Headers

Complete Article Headers

Newsgroups: comp.dcom.sys.cisco
Path: arc1-ca.pugleaf.net!sparky!uunet!sun-barr!ames!agate!boulder!recnews
From: Richard Letts <R.J.Letts@salford.ac.uk>
Subject: Re: AGS fan noise
In-Reply-To: <920816195848.35a004bc@DIR.TEXAS.GOV>; from "Danny Sheaffer" at Aug 16, 92 7:58 pm
Message-ID: <199208180815.AA16009@spot.Colorado.EDU>
Sender: news@colorado.edu
Date: 18 Aug 92 9:02:38 BST
X-Mailer: ELM [version 2.3 PL11]
Lines: 27