🚀 go-pugleaf

Hi all,

CISCO 3640, for configuration please see below, BRI ports.

The configuration has been tested with a terminal adapter, calling an ISDN
number corresponding to the BRI port 2/0. The Terminal adapter is able to
connect to the router.

I've tried to call a router 3640 with BRI slot from a WAP phone (9600 bps
and 14400, set to ISDN).

The following debug trace appears.

First of all:

routerct004#sh debug
PPP:
  PPP protocol errors debugging is on
  PPP protocol negotiation debugging is on
ISDN:
  ISDN Q931 packets debugging is on
  ISDN Q931 packets debug DSLs. (On/Off/No DSL:1/0/-)
  DSL  0 --> 31

here is how the call debugging appears:

routerct004#
00:12:17: %ISDN-6-LAYER2UP: Layer 2 for Interface BR2/0, TEI 68 changed to
up
00:12:17: ISDN BR2/0: RX <-  SETUP pd = 8  callref = 0x69
00:12:17:         Sending Complete
00:12:17:         Bearer Capability i = 0x8890
00:12:17:         Channel ID i = 0x89
00:12:17:         Calling Party Number i = '!', 0x81, '3483955070'
00:12:17:         Called Party Number i = 0xA1, '95292416'
00:12:17: %LINK-3-UPDOWN: Interface BRI2/0:1, changed state to up
00:12:17: BR2/0:1 PPP: Treating connection as a callin
00:12:17: BR2/0:1 PPP: Phase is ESTABLISHING, Passive Open
00:12:17: BR2/0:1 LCP: State is Listen
00:12:17: ISDN BR2/0: TX ->  CONNECT pd = 8  callref = 0xE9
00:12:17: ISDN BR2/0: RX <-  CONNECT_ACK pd = 8  callref = 0x69
00:12:19: BR2/0:1 LCP: TIMEout: Time 0xB480C State Listen
00:12:19: BR2/0:1 LCP: O CONFREQ [Listen] id 45 len 33
00:12:19: BR2/0:1 LCP:    AuthProto CHAP (0x0305C22305)
00:12:19: BR2/0:1 LCP:    MagicNumber 0x014DE756 (0x0506014DE756)
00:12:19: BR2/0:1 LCP:    MRRU 1524 (0x110405F4)
00:12:19: BR2/0:1 LCP:    EndpointDisc 1 Local
(0x130E01726F757465726374303034)
00:12:21: BR2/0:1 LCP: TIMEout: Time 0xB5190 State REQsent
00:12:21: BR2/0:1 LCP: O CONFREQ [REQsent] id 46 len 33
00:12:21: BR2/0:1 LCP:    AuthProto CHAP (0x0305C22305)
00:12:21: BR2/0:1 LCP:    MagicNumber 0x014DE756 (0x0506014DE756)
00:12:21: BR2/0:1 LCP:    MRRU 1524 (0x110405F4)
00:12:21: BR2/0:1 LCP:    EndpointDisc 1 Local
(0x130E01726F757465726374303034)
00:12:22: BR2/0:1 UNKNOWN(0x0801): LCP not open, discarding packet
00:12:23: %ISDN-6-CONNECT: Interface BRI2/0:1 is now connected to 3483955070
00:12:23: BR2/0:1 LCP: TIMEout: Time 0xB5960 State REQsent
00:12:23: BR2/0:1 LCP: O CONFREQ [REQsent] id 47 len 33
00:12:23: BR2/0:1 LCP:    AuthProto CHAP (0x0305C22305)
00:12:23: BR2/0:1 LCP:    MagicNumber 0x014DE756 (0x0506014DE756)
00:12:23: BR2/0:1 LCP:    MRRU 1524 (0x110405F4)
00:12:23: BR2/0:1 LCP:    EndpointDisc 1 Local
(0x130E01726F757465726374303034)
00:12:24: BR2/0:1 UNKNOWN(0x0801): LCP not open, discarding packet
00:12:25: BR2/0:1 LCP: TIMEout: Time 0xB6134 State REQsent
00:12:25: BR2/0:1 LCP: O CONFREQ [REQsent] id 48 len 33
00:12:25: BR2/0:1 LCP:    AuthProto CHAP (0x0305C22305)
00:12:25: BR2/0:1 LCP:    MagicNumber 0x014DE756 (0x0506014DE756)
00:12:25: BR2/0:1 LCP:    MRRU 1524 (0x110405F4)
00:12:25: BR2/0:1 LCP:    EndpointDisc 1 Local
(0x130E01726F757465726374303034)
00:12:25: BR2/0:1 UNKNOWN(0x0801): LCP not open, discarding packet
00:12:27: BR2/0:1 UNKNOWN(0x0801): LCP not open, discarding packet
00:12:27: BR2/0:1 LCP: TIMEout: Time 0xB6904 State REQsent
00:12:27: BR2/0:1 LCP: O CONFREQ [REQsent] id 49 len 33
00:12:27: BR2/0:1 LCP:    AuthProto CHAP (0x0305C22305)
00:12:27: BR2/0:1 LCP:    MagicNumber 0x014DE756 (0x0506014DE756)
00:12:27: BR2/0:1 LCP:    MRRU 1524 (0x110405F4)
00:12:27: BR2/0:1 LCP:    EndpointDisc 1 Local
(0x130E01726F757465726374303034)
00:12:29: BR2/0:1 LCP: TIMEout: Time 0xB70F0 State REQsent
00:12:29: BR2/0:1 LCP: O CONFREQ [REQsent] id 50 len 33
00:12:29: BR2/0:1 LCP:    AuthProto CHAP (0x0305C22305)
00:12:29: BR2/0:1 LCP:    MagicNumber 0x014DE756 (0x0506014DE756)
00:12:29: BR2/0:1 LCP:    MRRU 1524 (0x110405F4)
00:12:29: BR2/0:1 LCP:    EndpointDisc 1 Local
(0x130E01726F757465726374303034)
00:12:31: BR2/0:1 LCP: TIMEout: Time 0xB78C0 State REQsent
00:12:31: BR2/0:1 LCP: O CONFREQ [REQsent] id 51 len 33
00:12:31: BR2/0:1 LCP:    AuthProto CHAP (0x0305C22305)
00:12:31: BR2/0:1 LCP:    MagicNumber 0x014DE756 (0x0506014DE756)
00:12:31: BR2/0:1 LCP:    MRRU 1524 (0x110405F4)
00:12:31: BR2/0:1 LCP:    EndpointDisc 1 Local
(0x130E01726F757465726374303034)
00:12:33: BR2/0:1 LCP: TIMEout: Time 0xB8090 State REQsent
00:12:33: BR2/0:1 LCP: O CONFREQ [REQsent] id 52 len 33
00:12:33: BR2/0:1 LCP:    AuthProto CHAP (0x0305C22305)
00:12:33: BR2/0:1 LCP:    MagicNumber 0x014DE756 (0x0506014DE756)
00:12:33: BR2/0:1 LCP:    MRRU 1524 (0x110405F4)
00:12:33: BR2/0:1 LCP:    EndpointDisc 1 Local
(0x130E01726F757465726374303034)
00:12:35: BR2/0:1 LCP: TIMEout: Time 0xB8864 State REQsent
00:12:35: BR2/0:1 LCP: O CONFREQ [REQsent] id 53 len 33
00:12:35: BR2/0:1 LCP:    AuthProto CHAP (0x0305C22305)
00:12:35: BR2/0:1 LCP:    MagicNumber 0x014DE756 (0x0506014DE756)
00:12:35: BR2/0:1 LCP:    MRRU 1524 (0x110405F4)
00:12:35: BR2/0:1 LCP:    EndpointDisc 1 Local
(0x130E01726F757465726374303034)
00:12:37: BR2/0:1 LCP: TIMEout: Time 0xB9034 State REQsent
00:12:37: BR2/0:1 LCP: O CONFREQ [REQsent] id 54 len 33
00:12:37: BR2/0:1 LCP:    AuthProto CHAP (0x0305C22305)
00:12:37: BR2/0:1 LCP:    MagicNumber 0x014DE756 (0x0506014DE756)
00:12:37: BR2/0:1 LCP:    MRRU 1524 (0x110405F4)
00:12:37: BR2/0:1 LCP:    EndpointDisc 1 Local
(0x130E01726F757465726374303034)
00:12:39: BR2/0:1 LCP: TIMEout: Time 0xB9804 State REQsent
00:12:39: BR2/0:1 LCP: O CONFREQ [REQsent] id 55 len 33
00:12:39: BR2/0:1 LCP:    AuthProto CHAP (0x0305C22305)
00:12:39: BR2/0:1 LCP:    MagicNumber 0x014DE756 (0x0506014DE756)
00:12:39: BR2/0:1 LCP:    MRRU 1524 (0x110405F4)
00:12:39: BR2/0:1 LCP:    EndpointDisc 1 Local
(0x130E01726F757465726374303034)
00:12:41: BR2/0:1 LCP: TIMEout: Time 0xB9FD4 State REQsent
00:12:41: BR2/0:1 LCP: State is Listen
00:12:41: %ISDN-6-DISCONNECT: Interface BRI2/0:1  disconnected from
3483955070 , call lasted 24 seconds
00:12:41: ISDN BR2/0: TX ->  DISCONNECT pd = 8  callref = 0xE9
00:12:41:         Cause i = 0x8090 - Normal call clearing
00:12:41: ISDN BR2/0: RX <-  RELEASE pd = 8  callref = 0x69
00:12:41: %LINK-3-UPDOWN: Interface BRI2/0:1, changed state to down
00:12:41: BR2/0:1 LCP: State is Closed
00:12:41: BR2/0:1 PPP: Phase is DOWN
00:12:41: ISDN BR2/0: Ux_BadMsg(): Invalid Message for call state 0, call id
0x5, call ref 0x0, event 0xAB
00:12:41: ISDN BR2/0: TX ->  RELEASE_COMP pd = 8  callref = 0xE9
00:12:41: BR2/0:1 LCP: State is Closed
00:12:41: BR2/0:1 PPP: Phase is DOWN
routerct004#
00:12:56: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR2/0, TEI 68 changed to
down
routerct004#
00:13:27: BR2/0:1 LCP: State is Closed
00:13:27: BR2/0:1 PPP: Phase is DOWN
00:13:27: BR2/0:2 LCP: State is Closed
00:13:27: BR2/0:2 PPP: Phase is DOWN
routerct004#

The show version command produces the following output:

routerct004#sh version
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3640-JS-M), Version 11.3(10)T,  RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Wed 02-Jun-99 06:08 by pwade
Image text-base: 0x60008918, data-base: 0x60AF2000

ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE
SOFTWARE (fc1)

routerct004 uptime is 26 minutes
System restarted by reload
System image file is "flash:c3640-js-mz.113-10.T.bin", booted via flash

cisco 3640 (R4700) processor (revision 0x00) with 24576K/8192K bytes of
memory.
Processor board ID 18208715
R4700 processor, Implementation 33, Revision 1.0
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
Basic Rate ISDN software, Version 1.1.
2 Ethernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
8 ISDN Basic Rate interface(s)
16 terminal line(s)
DRAM configuration is 64 bits wide with parity disabled.
125K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

Cisco Documentation talks about a speed mismatch
(http://www.cisco.com/warp/public/112/chapter17.htm#LINK) ....."The second
type of problem in LCP is when only outbound CONFREQs are seen on one or
both peers as in the example below. This is usually the result of what is
referred to as a speed mismatch at the lower layer. This condition can occur
in either async or ISDN DDR."

CAN ANYBODY HELP ME?

Thanks very much

Massimiliano

-- 
Posted from mgw-x4.nokia.com [131.228.20.27] 
via Mailgate.ORG Server - http://www.Mailgate.ORG