Re: Problems hooking Cisco to T1 line

Article View: comp.dcom.sys.cisco

Article #238

Back to comp.dcom.sys.cisco Previous Next

#238

From: Bob Albrightson
Date: Wed, 19 Aug 1992 18:38

11 lines
766 bytes

>    Our Cisco are running 8.2(4) and 8.2(3). We have an RS449 (Cisco end) to
> 25 ping connector (DB25 I think) made up to GTE's spec. If anyone has any
> insight as to what might be going wrong or set up incorrectly I would
> greatly appreciate it.

What does the output of 'show controller mci' show?

Another possibility is you are not satisfying the ones density
requirement for the circuit.

 -bob

Technical Details

Message-ID: <CMM.0.90.2.714249485.albright@lager.cisco.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!boulder!recnews

Show Full Headers

Complete Article Headers

Newsgroups: comp.dcom.sys.cisco
Path: arc1-ca.pugleaf.net!sparky!uunet!boulder!recnews
From: Bob Albrightson <albright@lager.cisco.com>
Subject: Re: Problems hooking Cisco to T1 line
In-Reply-To: Your message of 19 Aug 92 14:46:17 GMT
Message-ID: <CMM.0.90.2.714249485.albright@lager.cisco.com>
Sender: news@colorado.edu
Date: 19 Aug 92 11:38:05 PDT
Lines: 11