X25 problem

Article View: comp.dcom.sys.cisco

Article #250

Back to comp.dcom.sys.cisco Previous Next

#250

From: Hans van der Molen
Date: Thu, 20 Aug 1992 12:46

30 lines
1378 bytes

This is the problem:
=====================
I have two routers (with 8.3(3)) connected to public X25 (64Kb).
If they are connected to each other with only this public x25 connection
using the X25 MAP command it will open up a VC (LCN) and keep it open untill
the service goes down.
X25 idle and no keepalive doesn't work.

How come the VC doesn't get cleared after the session has been ended ?

Is there a cisco-keepalive packet going every 100 seconds or does the
cisco do something else ?

I already disconnected all devices from the boxes that might cause 
keepalive packets.

This problems costs us a lot of money, so please react.....

Thanks,

Hans van der Molen,
Mentor Graphics,
Halfweg,
Holland.
-- 
                     ***********************************
                     ******  Hans van der Molen.  ******
                     * European Network Control Center *
                     *****   Halfweg - Holland    ******

Technical Details

Message-ID: <1992Aug20.124653.10379@news.mentorg.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!news.mentorg.com!root

Show Full Headers

Complete Article Headers

Newsgroups: comp.dcom.sys.cisco
Path: arc1-ca.pugleaf.net!sparky!uunet!news.mentorg.com!root
From: root@enc_hol.mentor.com (Hans van der Molen)
Subject: X25 problem
Originator: root@enc_hol.mentor.com
Sender: news@news.mentorg.com (News User)
Message-ID: <1992Aug20.124653.10379@news.mentorg.com>
Date: Thu, 20 Aug 1992 12:46:53 GMT
Nntp-Posting-Host: 137.202.130.4
Organization: Mentor Graphics Corporation
Lines: 30