Re: Advertising Static routes

Article View: comp.dcom.sys.cisco

Article #276

Back to comp.dcom.sys.cisco Previous Next

#276

From: Glyn Simpson
Date: Wed, 09 Sep 1992 08:04

31 lines
1462 bytes

Paul Traina (pst@cisco.com) wrote:
> In article <1992Sep07.155935.14888@rs6000.bham.ac.uk> G.Simpson@bham.ac.uk writes:
> >Can anyone tell me out there whether it is possible to advertise static
> >routes which have:
> >	1. Been defined as secondary addresses on an interface
> >	2. Been defined using the 'IP ROUTE' command and a weight.
> 
> try 'redistribute static'
> 
> as in
> 
> router rip
> network x.x.x.x
> redistribute static

That doesnt really seem to work - i already have that there. So far, i
have:

router rip
network 147.188.0.0
redistribute static
default-metric 1


then a couple of passive interfaces. I think the problem could be that 
it doesnt transmit subnets of the 147.188 network ?? (Could be wrong here).

--
Glyn Simpson, Systems Officer,  //  Voice: +44 (0) 21 414 6575
University of Birmingham        //  Fax:   +44 (0) 21 414 3952
Email: G.Simpson@bham.ac.uk     //  NIC Handle: GS56

Technical Details

Message-ID: <1992Sep09.080422.25989@rs6000.bham.ac.uk>

Path: arc1-ca.pugleaf.net!sparky!uunet!pipex!warwick!bham!dns0.bham.ac.uk!simpsong

References: <1992Sep7.173610.7242@morrow.stanford.edu>

Show Full Headers

Complete Article Headers

Newsgroups: comp.dcom.sys.cisco
Path: arc1-ca.pugleaf.net!sparky!uunet!pipex!warwick!bham!dns0.bham.ac.uk!simpsong
From: simpsong@dns0.bham.ac.uk (Glyn Simpson)
Subject: Re: Advertising Static routes
Sender: usenet@rs6000.bham.ac.uk (USENET News Service)
Message-ID: <1992Sep09.080422.25989@rs6000.bham.ac.uk>
Date: Wed, 09 Sep 1992 08:04:22 GMT
Reply-To: G.Simpson@bham.ac.uk
References: <1992Sep7.173610.7242@morrow.stanford.edu>
Organization: The University of Birmingham, England
X-Newsreader: Tin 1.1 PL5
Lines: 31

Reply to Parent Message