Errors on IGS/R console

Article View: comp.dcom.sys.cisco

Article #308

Back to comp.dcom.sys.cisco Previous Next

#308

From: Lee Ziegenhals
Date: Mon, 24 Aug 1992 03:30

16 lines
1265 bytes

I am getting a lot of the following errors on my IGS/R.  So far they do not
appear to be effecting the operation of the unit.  I am simply curious to
their significance and whether I should be concerned about them.  The error
message is clear enough as to *what* is happening, but it doesn't say much
about *why* :-).  I usually get 40 or 50 of these message a day.  Always the
same error, although the last few addresses in the traceback differ.

%SYS-3-INVMEMINT: Invalid memory action (malloc) at interrupt level
-Process= "*Sched*", ipl= 4
-Traceback= 161F4 201FE 67084 1B0F4 4510 104C 1000632 1008C98
%SYS-3-INVMEMINT: Invalid memory action (malloc) at interrupt level
-Process= "*Sched*", ipl= 4
-Traceback= 161F4 201FE 67084 1B0F4 4510 38B52 104C 1000632
%SYS-3-INVMEMINT: Invalid memory action (malloc) at interrupt level
-Process= "*Sched*", ipl= 4
-Traceback= 161F4 201FE 67084 1B0F4 4510 38EE4 38B52 104C

Technical Details

Message-ID: <BtGxq7.6CH@dptspd.sat.datapoint.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!dtix!darwin.sura.net!mips!swrinde!dptspd!lcz

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!dtix!darwin.sura.net!mips!swrinde!dptspd!lcz
From: lcz@dptspd.sat.datapoint.com (Lee Ziegenhals)
Newsgroups: comp.dcom.sys.cisco
Subject: Errors on IGS/R console
Message-ID: <BtGxq7.6CH@dptspd.sat.datapoint.com>
Date: 24 Aug 92 03:30:04 GMT
Organization: Datapoint Corporation, San Antonio, TX
Lines: 16