RIP hostroutes

Article View: comp.dcom.sys.cisco

Article #313

Back to comp.dcom.sys.cisco Previous Next

#313

From: Lutz Brunke
Date: Wed, 26 Aug 1992 14:29

13 lines
931 bytes

High,

i have seen a strange behavior on one of our AGS+ ciscos. Another host is
announcing the hostroute of his primary interface on the 2nd ethernet with
RIP. The AGS+ sees the RIP packet and installs a route to the whole subnet
through the other host.
So the questions are:
Does the AGS+ simply ignore the hostpart of the address?
Is there a way to change this behavior?
Does this still happen in 8.3 and 9.0? (We are currently using 8.2(6).)

Thanks in advance,
Lutz

Technical Details

Message-ID: <1992Aug26.142910.10246@news.DKRZ-Hamburg.DE>

Path: arc1-ca.pugleaf.net!sparky!uunet!dtix!darwin.sura.net!Sirius.dfn.de!news.DKRZ-Hamburg.DE!pampero.dkrz-hamburg.de!k202046

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!dtix!darwin.sura.net!Sirius.dfn.de!news.DKRZ-Hamburg.DE!pampero.dkrz-hamburg.de!k202046
From: brunke@dkrz-hamburg.dbp.de (Lutz Brunke)
Newsgroups: comp.dcom.sys.cisco
Subject: RIP hostroutes
Message-ID: <1992Aug26.142910.10246@news.DKRZ-Hamburg.DE>
Date: 26 Aug 92 14:29:10 GMT
Sender: news@news.DKRZ-Hamburg.DE
Reply-To: brunke@dkrz-hamburg.dbp.de
Organization: Deutsches Klimarechenzentrum GmbH, Hamburg
Lines: 13