Re: Token-Ring not reset after beaconing

Article View: comp.dcom.sys.cisco

Article #336

Back to comp.dcom.sys.cisco Previous Next

#336

From: Rex Mammel
Date: Fri, 21 Aug 1992 15:18

17 lines
940 bytes

we are also seeing this same problem on an AGS+ 2E2T
card on the ethernet interfaces also running 9.0(1).

Is this a known bug?

	  I believe I have seen this problem mentioned before and I am
	wondering if there is a fix yet.
	  I am running GS3-BFX 9.0(1) in an AGS+. On several occasions
	a beaconing condition on the token-ring has caused the token-ring
	interface on the cisco to go down. The interface does not reset
	automatically, but must be manually reset via software
	(shutdown, no shutdown).
	Thanks,
	  Bill

	Bill Rippon         Phone: 914-784-7479
	IBM Watson Research Center     Email: bjripp@watson.ibm.com

Technical Details

Message-ID: <9208211518.AA01244@trailboss.advtech.uswest.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!boulder!recnews

Show Full Headers

Complete Article Headers

Newsgroups: comp.dcom.sys.cisco
Path: arc1-ca.pugleaf.net!sparky!uunet!boulder!recnews
From: Rex Mammel <rexm@advtech.uswest.com>
Subject: Re:  Token-Ring not reset after beaconing
Message-ID: <9208211518.AA01244@trailboss.advtech.uswest.com>
Sender: news@colorado.edu
Date: 21 Aug 92 09:18:07 MDT
Lines: 18