Cisco Secondary address

Article View: comp.dcom.sys.cisco

Article #372

Back to comp.dcom.sys.cisco Previous Next

#372

From: Alan Hobesh
Date: Wed, 02 Sep 1992 23:10

18 lines
1095 bytes

Sorry, if this is a simple question, but we are new to Cisco.    
Please reply to alan@bofa.com. I will post replies if appropriate.

We have an AGS+, version 9.0(1).  We have configured a token ring interface
with a secondary address. This address is primarily composed of a network
of Sun work stations.

All the Sun Workstations on the network can ping the router and telnet into it,
and a "show ip route" on the router displays the network as being Connected.  Also
the arp table shows the correct MAC level address of any sun who pings or telnets
to the router.  The problem is that the Router can not ping the Suns or telnet 
into any of the sun hosts.  

I don't understand why this should be the case.


Thanks.

Technical Details

Message-ID: <1992Sep2.231039.1131@BofA.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!sun-barr!ames!pacbell.com!rtech!odinba!alan

Show Full Headers

Complete Article Headers

Newsgroups: comp.dcom.sys.cisco
Path: arc1-ca.pugleaf.net!sparky!uunet!sun-barr!ames!pacbell.com!rtech!odinba!alan
From: alan@BofA.COM (Alan Hobesh)
Subject: Cisco Secondary address
Message-ID: <1992Sep2.231039.1131@BofA.com>
Sender: alan@BofA.com (Alan Hobesh)
Organization: Bank of America, Capital Products, RMTG #5906
Date: Wed, 2 Sep 92 23:10:39 GMT
Lines: 18